DSC AMP-704 Instructions d'installation - Page 4

Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} DSC AMP-704. DSC AMP-704 4 pages. Point interface module

Imprimer la page

FCC COMPLIANCE STATEMENT

CAUTION: Changes or modifications not expressly approved by Digital Security Controls Ltd. could void your authority

to use this equipment.

This equipment generates and uses radio frequency energy and if not installed and used properly, in strict accordance with

the manufacturer's instructions, may cause interference to radio and television reception. It has been type tested and found

to comply with the limits for Class B device in accordance with the specifications in Subpart "B" of Part 15 of FCC Rules,

which are designed to provide reasonable protection against such interference in any residential installation. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to tele-

vision or radio reception, which can be determined by turning the equipment off and on, the user is encouraged to try to cor-

rect the interference by one or more of the following measures:

• Re-orient the receiving antenna

• Relocate the alarm control with respect to the receiver

• Move the alarm control away from the receiver

• Connect the alarm control into a different outlet so that alarm control and receiver are on different circuits.

If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The

user may find the following booklet prepared by the FCC helpful: "How to Identify and Resolve Radio/Television Interfer-

ence Problems". This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402, Stock #

004-000-00345-4.

Industry Canada

This Class B digital apparatus meets all requirements of the Canadian interference-causing equipment regulations.

Cet appareil numérique de la Classe B respecte toutes les exigences de règlement sur le matériel brouilleur du Canada.

Limited Warranty

DSC warrants that for a period of one year from the date of purchase, the product shall be free of defects in material and

workmanship under normal use and that in fulfillment of any breach of such warranty, DSC shall, at its option, repair or

replace the defective equipment upon return of the equipment to its repair depot. This warranty applies only to defects in

materials and workmanship and not to damage incurred in shipping or handling, or damage due to causes beyond the control

of DSC, such as lightning, excessive voltage, mechanical shock, water damage or damage arising out of abuse, alteration or

improper application of the product.

The foregoing warranty shall apply only to the original purchaser, and shall be in lieu of any and all other warranties,

whether expressed or implied and of all other obligations or liabilities on the part of DSC. This warranty contains the entire

warranty. DSC neither assumes responsibility for, nor authorizes any other person purporting to act on its behalf, to modify

or to change this warranty, nor to assume for it any other warranty or liability concerning this product.

In no event shall DSC be liable for any direct, indirect or consequential damages, loss of anticipated profits, loss of time or

any other losses incurred by the buyer in connection with the purchase, installation or operation or failure of this product.

Important!

DSC recommends that the entire system be completely tested on a regular basis. However, despite frequent testing,

and due to but not limited to criminal tampering or electrical disruption, it is possible for this product to fail to per-

form as expected

Toronto • Canada • www.dsc.com

Technical Support: 1-800-387-3630

Printed in Canada 29005952 R003

Direct all comments concerning this

publication to [email protected]