DSC Power Series Manuel - Page 17

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} DSC Power Series. DSC Power Series 18 pages. Neo image sensor
Également pour DSC Power Series : Manuel de référence (2 pages), Manuel de référence rapide (2 pages), Manuel d'installation (14 pages), Instructions d'installation (2 pages), Manuel rapide (4 pages), Manuel d'instructions d'installation (11 pages)

DSC Power Series PC1616 PC1832 PC1864 System Manual

When the keypad is loaned to global mode (pressing and holding the [#] key), you will see a Global

Partition Status screen. This shows basic status for up to 8 partitions, depending on the configuration of

your system.

Each partition is identified by a number. Below each number is the current status of that partition.

A - Partition is Armed

N - Partition is Not Ready to Arm

R - Partition is Ready to Arm

! - Partition is in Alarmed

- - Partition is Not Enabled

Sensor Reset

Certain sensors, after having detected an alarm condition, require a Reset to exit the alarm condition (i.e.

glassbreak sensors, smoke detectors, etc.). Ask your alarm company if this function is required on your

system.

To reset the detectors, press and hold the Reset key for 2 seconds or press [*][7][2].

If a sensor fails to reset, it may still be detecting an alarm condition. If the sensor reset is successful, the

alarm is canceled. If unsuccessful, the alarm will reactivate or continue.

How can we help?

https://alpha.adt.com/help/61[11/12/2018 9:40:17 PM]

Return to Top