DSC Meridian WLS906 Instructions pour l'installation et l'utilisation - Page 3
Parcourez en ligne ou téléchargez le pdf Instructions pour l'installation et l'utilisation pour {nom_de_la_catégorie} DSC Meridian WLS906. DSC Meridian WLS906 4 pages. Dsc meridian battery-powered smoke alarms
Imprimer la pageOwner's Maintenance Instructions
The Meridian Smoke Alarm is designed to require a minimum of
maintenance. If the case becomes dusty, wipe the case gently with
a soft dry cloth. If the case is greasy, wipe the case gently with a
soft cloth slightly dampened with soapy water.
Never disassemble the smoke alarm; there are no user
serviceable parts inside the unit. Never paint the unit, as
paint may prevent smoke from entering the unit. If you are
planning renovations or repainting, contact your Installer
and ask that the unit be temporarily removed until work is
complete.
If the unit is located in an area where it is exposed to high levels of
dust or insects and is found to cause false alarms, it may require
service; contact your Smoke Alarm Installer or Dealer.
Fire Safety In The Home
Most fires occur in the home, and to minimize this danger, it is
recommended that a household fire safety audit be conducted and
a family escape plan be developed.
Household Fire Safety Audit
1 Are all electrical appliances and outlets in a safe condition?
Check for frayed cords, overloaded lighting circuits, etc. If you
are uncertain about the condition of your electrical appliances or
household service, have a professional evaluation.
2 Are all flammable liquids stored safely in closed containers in a
cool, well ventilated area? Cleaning with flammable liquids
should be avoided.
3 Are hazardous materials such as matches out of the reach of
children?
4 Are furnaces and wood burning appliances properly installed,
clean and in good working order? If in doubt, have a
professional evaluation.
Family Escape Planning
There is often very little time between the detection of a fire and the
time it becomes deadly. Because of this, it is very important that a
family escape plan be developed and rehearsed.
1 Every family member should participate in developing the
escape plan.
2 Study the possible escape routes from each location within the
house. Since many fires occur at night, special attention should
be given to the escape routes from sleeping quarters.
3 It is essential that escape from a bedroom be possible without
opening the interior door. Consider the following when making
your escape plans:
• Make sure that doors and windows that open to the outside are
easily opened. Ensure that they are not painted shut, and that
their locking mechanisms operate smoothly.
• If opening the exit or using the exit is too difficult for children, the
elderly or handicapped, plans for rescue should be developed.
This includes making sure that those who are to perform the
rescue can promptly hear the fire warning signal.
• If the exit is above the ground level, an approved fire ladder or
rope should be provided, as well as training in its use.
• Exits on the ground level should be kept clear. Be sure to remove
snow from exterior patio doors in winter; outdoor furniture or
equipment should not block exits.
• The family should have a predetermined assembly point where
everyone can be accounted for; for example, across the street or
at a neighbour's house.
• Once everyone is out of the house, call the Fire Department.
• A good plan emphasizes quick escape. Do not investigate first
or attempt to fight the fire, and do not attempt to rescue belongings
or valuables as this takes up time. Once outside, do not re-enter
the house; wait for the Fire Department.
• Write the plan down and rehearse frequently so that should an
emergency arise, everyone will know what to do. Revise the plan
as conditions change; for example, when there are more or fewer
family members in the home, or if there are changes to the house.
• Make sure your fire warning system is operational by conducting
weekly tests. If you are unsure about system operation, contact
your Smoke Alarm Installer or Dealer.
• It is recommended that you contact your local fire department
and request further information on home fire safety and escape
planning. If available, have your local fire prevention officer
conduct an in-house fire safety inspection.
Installation Instructions
Specifications
Operating Voltage ..................... 9V (six AA Alkaline batteries)
Smoke Sensitivity ........................ 2.5%/ft obscuration ±0.5%/ft
................................................... 2.5%/305mm ±0.5%/305mm
Operating Environment ................ 0°C - 37.8°C (32°F - 100°F)
............................................... 5% - 95% RH, non-condensing
Field Test ............ Magnet-activated reed switch or Pushbutton
............................. and/or Gemini 501 Smoke Alarm Analyser
Dimensions
Battery Installation
Remove the mounting plate from the alarm by pushing the locking
tab and turning the mounting plate counter-clockwise.
Hold the unit with the battery compartment facing you, and the
imprinted wording right-side up. Install the first two batteries in the
row nearest to you, with the + terminals facing left. Next, install the
middle two batteries with the + terminals facing to the right. Place
your thumb over the centre of these four batteries to keep them in
place. Install the last two batteries, with their + terminals facing to
the left, by snapping them past the nylon retainer.
The smoke alarm is designed to use Eveready Energizer Alkaline
Batteries. Do not use other brands of batteries with the smoke
alarm. Using brands other than the Eveready Energizer will
void ULC approvals, and may affect the system's operation.