DSC Power Series Manuel - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} DSC Power Series. DSC Power Series 18 pages. Neo image sensor
Également pour DSC Power Series : Manuel de référence (2 pages), Manuel de référence rapide (2 pages), Manuel d'installation (14 pages), Instructions d'installation (2 pages), Manuel rapide (4 pages), Manuel d'instructions d'installation (11 pages)

DSC Power Series PC1616 PC1832 PC1864 System Manual

Bypass Groups

A Bypass Group is a selection of zones programmed into the system. If you bypass a group of zones on a

regular basis, you can program them into the Bypass Group, so that you do not have to bypass each zone

individually every time. One Bypass Group can be programmed on each partition.

To program a Bypass Group:

1. Press [*][1], then your [access code] (if necessary).

2. Enter the two-digit numbers (01-64) of the zones to be included in the Bypass Group. On

PK5500/LCD5500 keypads, you can also use the [< >] keys to find the zone to be included in the

bypass group, and then press [*] to select the zone.

3. To save the selected zone into the group, press [9][5].

4. To exit bypassing mode and return to the Ready state, press [#].

To select a Bypass Group when arming the system:

1. Press [1][*], then your [access code] (if necessary).

2. Press [9][1]. The next time the system is armed, the zones in this group will be bypassed.

3. To exit bypassing mode and return to the Ready state, press [#].

Note: Bypass Groups are only recalled if the system is armed/disarmed after programming the bypass

group. This feature is not to be used in UL Listed installations.

Emergency Keys

Press the [F], [A] or [P] key for 2 seconds to generate a Fire, Auxiliary or Panic alarm. The keypad sounder

will beep indicating that the alarm input has been accepted and transmission to the central station is

underway. Ask your alarm company if the emergency keys are available on your system.

Note: The Fire keys can be disabled by the installer.

LED5511/LCD5511 Keypad

Press and hold both keys simultaneously for two seconds to send the following messages:

[1][3] Fire Message

[4][6] Auxiliary Message

[7][9] Panic Message

https://alpha.adt.com/help/61[11/12/2018 9:40:17 PM]