DSE RH Series Manuel - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} DSE RH Series. DSE RH Series 12 pages. Ip anpr cameras with ocr
Également pour DSE RH Series : Configuration (12 pages)

Imprimer la page
DSE RH Series Manuel
ANPR. MANUAL
RH SERIES - PLATE READING IP CAMERAS
Page:11
To customize the settings, you should place a vehicle in the reading area at night and check the
correctness of the changes on the monitor.
Once you are satisfied with your settings, press SAVE to save. Then return to STANDARD mode
to keep the customizations. If you exit the configuration without returning to the standard mode,
this message appears which must be answered YES
This message reminds you that you must not leave the configuration mode active (Debug) but
you must switch to standard operation which will take into account the settings you have defined
in the Debug mode.
Now you have configured the camera for reading license plates. Carry out some vehicle transit
night tests and possibly review the settings. If you are not satisfied with your changes you can
restore the factory values with the FACTORY SETTING button. The night shot of the optimal plate
is the one shown below, with a very dark image and a plate well lit by infrared, but without being
bleached by excessive lighting.
DSE SRL - ITALY - WWW.DSE.EU