DSI LIGHTING DS18114 Manuel d'utilisation et d'entretien - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} DSI LIGHTING DS18114. DSI LIGHTING DS18114 18 pages. 1-light wall sconce
Imprimer la page
Installation
1
Preparing the mounting bracket
□
Fasten the support screws (long) (CC) into the mounting
bracket (AA), and secure it using the hex nuts (DD).
NOTE: The support screws (long) (CC) should extend
long enough to protrude through the canopy on the
fixture body (A) when it is mounted. (Adjust as needed.)
3
Making the electrical connections
□
Strip 3/4 in. of insulation from the wire ends.
□
Connect the black wire from the fixture to the black wire from the outlet box, then connect the white wire from the fixture to the
white wire from the outlet box.
□
The bare copper ground wire from the fixture must loop one turn under the head of the green ground screw (EE) on the mounting
bracket (AA) before it is connected to the ground conductor of the supply circuit.
□
Cover the wires with wire connectors (FF). Tape the wire connectors (FF) and wires together, and carefully position all wires inside
the outlet box.
FF
EE
AA
2
Installing the mounting bracket
□
Fasten the mounting bracket (AA) onto the outlet box using
two outlet box screws (short) (BB).
CC
AA
DD
5
AA
BB