ATS Co-Pilot Manuel d'installation - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} ATS Co-Pilot. ATS Co-Pilot 12 pages. For dodge cummins 2003
Également pour ATS Co-Pilot : Manuel d'installation (15 pages), Manuel d'installation (12 pages)
Imprimer la page
10-03-12
Dip switch selection:
---------------------------------------------------------------------------------------------------------------------------------------
Switch #1
If your Dodge's transmission has a stock valve body flip #1 switch to ON position
If your Dodge's transmission has an ATS valve body flip #1 switch to OFF position
----------------------------------------------------------------------------------------------------------------------------- ----------
Switch #2
Automatically cancels OD from a stop, only cancels after ignition has cycled, cancels at speed
above 3mph.
IMPORTANT: If the white wire of the Co-Pilot harness is not connected, then switch #2 must
be set to the "ON" position. With the wire connected the options below are available.
If you want automatic OD cancel from a stop flip #2 switch ON
If you do not want automatic OD cancel from a stop flip #2 switch OFF
----------------------------------------------------------------------------------------------------------------------------- -----------
Switch #3
Speed setting
On=low speed cut out (deceleration only)
Off=Hi speed cut out (deceleration only)
------------------------------------------------------------------------------------------------------ ----------------------------------
Switch #4
Set this switch to the ON position
------------------------------------------------------------------------------------------------------------------- --------------------
We have preset the Co-Pilot module #1-ON, #2-ON, #3-OFF, #4-ON
ATS Diesel Performance
This setting is designed to be used with an exhaust brake.
601-900-2272-INST