DSLR Pros Cannes HD Edition Aerial Kit Manuel de l'utilisateur - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DSLR Pros Cannes HD Edition Aerial Kit. DSLR Pros Cannes HD Edition Aerial Kit 12 pages. Sundance hd edition aerial kit contents list

Imprimer la page
Phantom 2 Flight Procedures
It is recommended that you follow this procedure when flying your craft.
o
Be certain that the WiFi function on your GoPro is off. If you see a flashing blue
light on your GoPro, this means the WiFi function is on and must be turned off
before starting your craft.
o
Check that batteries for transmitter and craft are fully charged and properly
installed.
o
Check that a camera is connected to gimbal.
o
Check that antennas are connected to FPV monitor.
o
Check that propellers are securely fastened to motors.
o
Place all switches on transmitter in their uppermost position with the throttle all
the way down.
o
Power on your transmitter.
o
Power on your craft and wait for LED lights to stop flashing red, indicating that
your craft has achieved its GPS signal.
o
Perform a compass calibration.
o
With the craft on an even surface at least ten feet away from you, start the
motors by moving the control sticks down and towards the center of the
transmitter.
o
Press up on the throttle to take off.