3nStar RPT004 Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} 3nStar RPT004. 3nStar RPT004 7 pages.

BUTTON AND INDICATORS

(1) FEED BUTTON

Press to FEED paper manually.

(2) PAPER INDICATOR

When this indicator and Error indicator are ON, it means the printer is out of paper;

when both lights are off, it means the printer has paper.

(3) POWER INDICATOR

This LED is on indicates that the printer is powered on. This LED off indicates that the

printer is powered off.

(4) ERROR INDICATOR

When the printer encounters errors cutter error, and printhead overheating, the Error

LED will flash.

SELF TEST

1.Turn off the printer.

2. Press and hold on the FEED button.

3. Turn on the printer, wait for the ERROR and PAPER's LEDs are flash, then release the

FEED button.

METHOD TO ENTER HEXADECIMAL MODE

To enter the hexadecimal dump mode, turn off the printer, press and hold on the

FEED button, then turn on the printer. After waiting for about 10 seconds, press the

FEED button. The printer will enter the hexadecimal dump mode and print out

'Hexadecimal Dump'.

PRINTER DEFAULT SETTINGS

Turn off the printer, press and hold on the FEED button, then turn on the printer. After

waiting for approximately 20 seconds and hearing two beeps from the printer, release

the FEED button to complete the factory default settings.

HOW TO SOLVE PAPER JAM

(1) METHOD 1

Re-start printer.

(2) METHOD 2

Open the cover located at the top edge of the paper outlet, then turn the white gear

on top of the cutter. Once the cutter returns to its initial position, the printer will be

ready for normal use.

CAUTION: Do not force open the cover, as this may damage the printhead and the

cutter.