ATS Diesel Performance Aurora Plus - 5000 Manuel d'installation - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} ATS Diesel Performance Aurora Plus - 5000. ATS Diesel Performance Aurora Plus - 5000 18 pages. Aurora plus - 5000 turbo kit (2003-2007) 5.9l dodge
Imprimer la page9. Connect the factory oil drain tube to the Aurora 5000 using the gasket
provided in the kit (Figure 1, #25) and the two 8mm x 20 bolts (Figure 2,
#12).
10. Route the supplied long drain tube (Figure 1, #17) from the front oil drain
port up to the factory turbo charger. Try to route the drain tube as close to
the engine block as possible to make room for the intake tube.
11. Install the intake tube (Figure 1, #13) using one 5.5" and one 4.5" clamp
provided. Use the 4" coupler (Figure 1, #7) provided to connect the
compact 90° boot (Figure 1, #6) and the 4" intake tube (Figure 1, #13).
12. Remove the factory oil feed fitting from the side of the oil filter housing
and remove one of the plugs from the top of the oil filter housing.
13. Install the supplied 14mm to -4 JIC (Figure 2, #10) oil feed fitting into the
side of the filter housing and the 1/8NPT to -4 JIC (Figure 2, #11) oil feed
fitting into the top of the filter housing.
14. Install the supplied 14" oil feed line (Figure 1, #16) from the filter housing
to the oil feed fitting on the Aurora 5000. Route the oil feed line away
from the exhaust manifold. Connect the 45° fitting to the Aurora 5000.
15. Install the supplied 17" oil feed line (Figure 1, #15) from the fitting on top
of the filter housing to the oil feed fitting on the factory turbo. Route the oil
feed line away from the exhaust manifold and turbine housing. Connect
the 90° fitting to the factory turbo.