ATSI LST-650 Manuel de l'utilisateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ATSI LST-650. ATSI LST-650 10 pages. Nema load switch tester

Safety Information

The LST-650 (Tester) should only be used by qualified and authorized traffic signal technicians or
engineers who are familiar with generally accepted electrical safety practices as well as local and national
safety codes. To avoid possible electric shock, burns, or fire, read all information contained in this manual
before attempting to use the tester.
Do not use the Tester around explosive gas, vapor, or dust.
Do not use the Tester in a wet environment.
Do not attempt to open any part of the Tester enclosure.
Only use the power cord provided with the Tester.
The Tester should only be powered from 120 VAC.
The Tester is designed to test ONLY Load Switches that are designed in accordance with NEMA Traffic
Signal Control Equipment Specifications. If you are not sure if a device meets this criteria, do not attempt
to test it!
The Tester must dissipate large amounts of power (heat) during certain tests. The enclosure surfaces may
become hot while running tests.
LST-650 User's Manual v1
IMPORTANT SAFETY INFORMATION!
READ BEFORE ATTEMPTING TO USE THE LST-650!
Page 3 of 10