DSPM Power Lynx 1 Spécifications techniques - Page 4

Parcourez en ligne ou téléchargez le pdf Spécifications techniques pour {nom_de_la_catégorie} DSPM Power Lynx 1. DSPM Power Lynx 1 10 pages.

1.8 SERVICE AND SPARES PARTS

A. The manufacturer shall upon request provide spare parts kits for the UPS module in a timely

manner as well as provide access to qualified factory trained service personnel to provide pre-

ventative maintenance and service on the UPS module when required.

1.9 MAINTENANCE, ACCESSIBILITY AND SELF DIAGNOSTICS

A. All UPS subassemblies, as well as the battery, shall be accessible from the front only. UPS

design shall provide maximum reliability and minimum MTTR (mean time to repair). To that

end, the UPS shall be equipped with a self-test function to verify correct system operation. The

electronic UPS control and monitoring assembly shall therefore be fully microprocessor based.

1. Auto-compensation of component drift;

2. Self-adjustment of replaced subassemblies;

3. Extensive acquisition of information vital for computer-aided diagnostics (local or remote);

PART 2 PRODUCTS

2.1 ACCEPTABLE MANUFACTURERS/PRODUCT

A. DSPM Power Lynx 1 Outdoor Emergency Lighting System

B. Engineer permits substitutions, subject to meeting all the requirements of this specification

and having written approval no less than 10 days prior to bid closing.

PRODUCT SPECIFICATION

A. UPS Design Requirements

1. Output Power Continuous Rating: The continuous output power rating of

the UPS shall be shall be ___________ KW (refer to data sheet for

power levels).

2. Input Voltage: ___________ VAC – 15% / +10%, single phase, 2-wire

plus ground.

3. Output voltage(s): ___________VAC single phase, 2 wire plus ground.

4. Battery Autonomy: The UPS shall be capable of operating at full load for

10 minutes at unity PF.

5. Battery Type: Valve regulated, sealed, Lead Calcium (AGM).

Title: Micro

Doc No.: 018-1000-02

Description: Emergency Lighting Inverter User's Manual

Phone :

Fax:

Rev: NR

Website:

Date: 07/26/2016

E-Mail:

1.877.DSPM.POWER

1.877.377.6769

909.930.3335

www.dspmanufacturing.com