DSPPA DSP5505C Manuel du propriétaire - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} DSPPA DSP5505C. DSPPA DSP5505C 5 pages. Iteach voice enhancement system

Imprimer la page

2.  Plug the power supply to the projector's

power supply.

3.  Make sure that the speaker unit is not

more than 4m away from the front wall

4.  Do not need to turn on the speaker unit as it is automatic turn on when the pendent

microphone is ON.

NOTE

Once the DSP5505C pendent microphone is turned on in the room, the speaker unit will

turn on instantly.

To turn off the speaker unit, tap power button on pendent microphone once. The LED light

on the speaker unit will go OFF to indicate that the speaker is OFF.

Teacher is advisable to oﬀ their pendent microphone (pressing & hold the power button for

2-3 sec) before they leave the room.

Cost Savings:

1.  No extra power socket and heater switch is needed for installation. This will save

unnecessary cost for provision of electrical points.

2.  The system cannot be used by 3rd party or students without the pendent microphone.

3.  Only simple bracket is needed to mount up the 1kg speaker unit. Minimal cost for

installation. Users can choose to place the speaker unit on table or on top cabinet too.

SPECIFICATION

Speaker Unit

Pairing Type

Size

Weight

Material

Speaker Drivers

Nominal Power

Max. Power

Input

Power input

Battery

Bluetooth

DSP5505R

Single Pairing

118 x 118 x 145 mm (including handle)

1kg (including battery pack)

ABS Dark Grey Resin (Housing)

1 x 6.35mm(Main), 2 x 5.59mm (Side) bridged

20W

28W

3.5mm (Audio In)

15VDC (included with speaker unit)

12V 6000mAH Pack (Li-126000)

Included (ON by command)

Dual Pairing