Attainment Company EXPRESS ONE Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Attainment Company EXPRESS ONE. Attainment Company EXPRESS ONE 4 pages.

Set-Up
1. Insert the two AAA batteries into the
compartment on the back of the unit.
2. To insert a picture, slide both gold latches
from LOCK to OPEN. Lift the frame. Two
black plastic framing mats are included so
you can use pictures in three sizes: 3" x 5,"
4" x 6," or 5" x 7".
3. Remove and set aside mats you are
not using.
4. Insert the picture, making sure it's facing the
right direction.
5. Put the frame back in place, and slide both
latches back to LOCK.
How to Record
1. Find the gold latch on the back of the unit.
Slide the latch to REC. Turn the unit over.
2. When you are ready to record the message,
press and hold the center of the picture area.
(Pressing the square gold button will not activate
recording). While the picture is being pressed,
a red LED will light, indicating that the unit
is recording.
3. Speak clearly into the MIC next to the LED, and
record a message up to 10 seconds. When you
finish speaking, stop pressing on the picture. The
LED will go out when you stop pressing on the
picture or when time runs out, indicating that
recording has stopped.
4. Turn the unit over and slide the gold latch
from REC to PLAY. The Express One is now
ready to use.
REC
PLAY