DSPPA MAG6701 Manuel de l'utilisateur - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DSPPA MAG6701. DSPPA MAG6701 20 pages. 100v network terminal
Également pour DSPPA MAG6701 : Instructions (4 pages)

Imprimer la page

6. Operating Instructions for Setting Up the Terminal on the

Host Computer

6.1 IP Address Setting

This speaker can be customized to modify the network parameters. Please read this section in detail if you need

to use this function. The alteration methods are as follows:

Method 1：

IP address of host computer/ computer alteration requires IP address of host computer/ computer and the

terminal address in the same network segment. For example, the terminal IP address is 192.168.40.5, while

the IP address of host computer/ computer should be 192.168.40.XX (Note: the setting IP can not appear

IP conflict phenomenon)；

Input the IP address of the terminal on IE browser after connecting host computer/ computer and the

terminal, and then access into the below as shown in Pic. 1;

Click "Confirm to alteration"to save the changes successfully after altering the terminal IP address or

server address on "Network configuration".

Method 2：

1. Enter the host software "Settings" -> "System Maintenance" -> "Device Maintenance"

2. Find the IP address of the terminal label, select and click Modify.

3. As shown in Pic. 2, modify the parameters and click OK to see the interface shows success.

(Pic. 1)