Atten ST-2090D Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Atten ST-2090D. Atten ST-2090D 2 pages.
Également pour Atten ST-2090D : Manuel de l'utilisateur (8 pages)

Imprimer la page

3. Temperature Locking Function

Press LOOK/℃/℉ button for 3 seconds at the same time under working mode, the

current temperature will be locked, the temperature won't be changed by turning

the knob button, and display LOC for locking temperature. Can unlock the current

temperature by pressing LOOK/℃/℉ button for 3 seconds again when temperature

locking.

4. Switching Temperature Unit

The current temperature unit will be switched by pressing LOOK/℃/℉ button at

the same time under working mode, the indicate light of temperature unit will

be changed accordingly .

Soldering tips

480

Turn the knob

button

896

5. Auto Standby Function

When the soldering not in use and put the soldering iron on the iron holder, it will auto

standby after 10 minutes, heater is heating up to 200 ℃, nixie tube display STB，pick up

the soldering iron and back to normal working mode.

6.Auto Sleep Function

In auto standby mode, the soldering station will auto sleep after 20 minutes, nixie tube

display SLP , the heaing core is not heated , it will get back to normal work mode by

adjusting the knob or pressing the button.(P.S. It will auto sleep when not in use

machine doesn't operate and turn to sleep mode)

slp

7. Warning

E02 shown on the display screen means there is error for sensor.

e02

Product warranty

This product is guaranteed for two years from the date of purchase(excluding

consumables such as the heating core).Ifany quality problem is found within the

guarantee period, we will response for the maintenance free of charge.

For those product beyond the warranty period, we provide life-long maintenance

services.

For those product damaged due to users'improper application and unauthoried

changes to the product parts, ourcompany only provides limited warranty service.

In case of a product fault, please send the faulty product to the designated

maintenance shop for maintenance, and those service center and personnel

unauthorized by the factory are prohibited from carrying out any maintenance

on the product.