Atten ST-1509 Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Atten ST-1509. Atten ST-1509 16 pages.

5.Auto-standby function

Under the STB menu, press "▲" and "▼" to set the standby parameters:Off/On Time:10~60

(default 1) minutes. the heater temperature is 150 ℃ under standby status. (diagram 1-14)

open the auto standby function, and the standby time is 20 minutes. (diagram 1-15) turn off the

auto standby function . In standby mode, pick up the soldering tool or press any key to

automaticallyresume normal operation. (Note: If the device is not in a static state, it will affect the

device to enter auto sleep)

SET

6.Auto-sleep function

Note: The auto sleep function needs to be used when the auto standby function is turned on.

When the auto standby function is turned off, the auto sleep function is turned off at the same

time. The auto sleep function cannot be turned off when the auto standby function is turned on.

Under the OFF menu, press "▲" and "▼" button can be set the heating time:10~60(default 30)

minutes. When the heating state is turned off, pressing any button will automatically resume the

normal working mode.

Example:The standby time is 10, and the sleep time is 20. The total time is 30 minutes. After

heating is turned off, the heating core is not heated.

SET

2 0

o f

SET

S L P