Attero Tech unDAES-O Manuel de l'utilisateur - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Attero Tech unDAES-O. Attero Tech unDAES-O 12 pages. 4-channel dante to aes/ebu interface

Imprimer la page

4 – ARCHITECTS & ENGINEERS SPECIFICATION

The Dante to AES3 Interface shall provide 4 channels of Dante networked audio converted to the AES3 digital audio output

format. The unit shall provide a Power/ID LED, a Sys, LED, a Sync LED and a Rate LED on the front panel to indicate system

status. The unit shall two XLR connectors on the rear panel for connection to AES3 capable digital audio equipment. A

rear panel Date interface shall receive power over the Ethernet cable from an IEEE 802.af PoE compliant switch or mid-

span injector, a +24VDC power supply, or another Power Link capable device. The device shall support Dante audio

network connectivity via two Ethernet connections available on two RJ-45 connectors. The Ethernet connections shall

support daisy chaining of Dante and Ethernet data.

The unit shall support 4 digital audio output channels at 44.1kHz, 48kHz, 88.2 kHz and 96 kHz sample rates, with 24-

bit audio samples.

The unit shall support AES3 digital audio output and indicate professional mode, bit depth and sample rate within the

AES3 status bit fields.

The Dante to AES3 Interface shall be compliant with the RoHS directive. The Dante interface unit shall be compliant with

the EMI/EMC requirements of FCC and CE.

Warranty shall be 2 years.

4.1 – Device Specifications

AES3 (IEC 60958)

Connector(s)

AES3 Status Format

Audio Performance:

Audio Channels

Sample Rates

Bit Depth:

THD:

Two (2) 3-Pin XLR Male

Professional

Four Dante network audio

channels to AES3 digital

Outputs

44.1kHz

48 kHz

88.2kHz

96kHz

24-bit

< 0.001%

Dante Network

Physical Level:

Connector:

Cable Quality:

Transmission

Speed:

Power

Requirements

Power Consumption

Dimensions

Weight

Compliance

Page 11

unDAES-O

User Manual

Ethernet

Single RJ-45

CAT-5e or better

1Gbps

Class 0 802.3af PoE

PD compliant

< 3 W

6.45" W x 1.06" H x

3.45" D

≈ 0.74 lbs

FCC Part 15 Class A

CE (EN 55022 Class A)

614-00024 Rev 02