Attero Tech unAIO2X2+ Manuel de l'utilisateur - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Attero Tech unAIO2X2+. Attero Tech unAIO2X2+ 15 pages. 2x2 aes67 interface

Imprimer la page
4 – ARCHITECTS & ENGINEERS SPECIFICATION
The AES67 break out Interface shall have two balanced mic/line analog inputs and two balanced line analog outputs. Each
analog input shall be capable of driving an AES67 audio stream and each analog output shall be capable of being driven
from an AES67 audio stream.
Each input channel shall have +48V phantom power, selectable via software on a per channel basis. Each input channel
shall have five gain levels: -12dB (pad active), 0dB, +15dB, +30dB and +45dB, selectable via software on a per channel
basis.
Each output channel shall have adjustable gain between 0dB and –60dB in 1dB increments plus a mute, selectable via
software on a per channel basis.
All parameter changes will be non-volatile and self-restoring in the event of AC or PoE power interruption.
The unit shall accept either +24VDC or IEEE 802.3af standard PoE as power input. The unit shall be compliant with FCC
47CFR Parts 15B and 18 (Class A), EN 55011, ICES-003, CE (EN55022 Class A and EN55024 Class A), and RoHS
requirements.
The unit shall be the Attero Tech unAIO2x2+ I/O Interface
4.1 – Device Specifications
Audio Inputs:
Input Type:
Gain:
Input Impedance:
Maximum
Input
Levels:
Phantom Power:
Audio Outputs:
Output Type:
Output Volume
Maximum
output
level:
Audio Performance:
EIN
Output Noise:
System THD:
 Attero Tech LLC 2018
Balanced and RF filtered 3-
pin depluggable
-12
dB
Input
Pad;
0dB,
+15dB,
+30dB,
+45
dB
software selectable
>1.8K ohms at any gain
setting
+20dBu @ 0dB gain (with
pad active)
+8dBu @ 0dB
-7dBu @ +15dB gain
-22dBu @ +30dB gain
-37dBu @ +45dB gain
+48V, software selectable
Balanced
line
level
with
automatic muting on loss of
AES67 signal
-60 dB to 0dB in 1 dB steps
+20dBu (@ 0dB volume)
-119bBu (+45dB gain)
<-85dBu @ 0dB gain
<0.05% at any gain, input
signal 3dB below maximum
Audio Network:
Physical Level:
Connector:
Cable Quality:
Transmission Speed:
Supported
Sample
Rates
Minimum
Dante
Network Latency
Power Requirements
PoE
Power Consumption
Cable Quality:
Physical Dimensions
Width
Height
Depth
Weight
Product Compliance
FCC CFR 47 Parts 15B Class A, EN55011
ICES-003
CE (EN55022 / EN55024)
RoHS
REACH
Page 5
unAIO2X2+
User Manual
Standard Ethernet
Single RJ-45
CAT-5e or better
100 Mbps
44.1kHz
48kHz
1ms
802.3af
PoE
PD
compliant
< 5W Max
CAT-5e or better
6.45"
1.06"
3.45"
0.8 lbs.
614-00040 Rev 01