DSS Weatherproof Day & Night Color Camera Manuel du propriétaire - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} DSS Weatherproof Day & Night Color Camera. DSS Weatherproof Day & Night Color Camera 6 pages.
Imprimer la page7. On-Screen Display
Explanation of the On-Screen Display
The OSD (On Screen Display) is as follows:
1
2
3
WAIT
1. Focus
The
appear during the focus manual
mode.
2. Mirror
When IMAGE MIRROR is ON state. The
image is displayed in the opposite direction.
The
appear during the mirror mode.
3. Back light Display
In case the excessive light is behind the
center object, it is necessary to prevent
the center object from too much
darkness. Turn the BACK LIGHT ON,
then the center object is not influenced
by the back light.
16
Weatherproof Zoom
8. Menu Format
MENU
1 BACKLIGHT
2 SLOW SHUTTER
3 DAY / NIGHT
Move up and down
4 WB CONTROL
using the TELE/
WIDE button.
5 SHUTTER
6 CAMERA
MENU
7 ZOOM START
8 ZOOM STOP
9 BRIGHTNESS
10 SHARPNESS
11 FOCUS
12 PROTOCOL
13 INIT SET
END
18
Weatherproof Zoom
X10000
ID 255
4
5
6
7
X132
8
4. WBC(White Balance Control) Display
See Page 17.
5. Shutter Speed
Use to select the shutter speed.
6. Camera ID Display
See Page 17.
7. Wait Mode
Indicates the camera stand-by mode
until the camera power turns on.
8. Example of Zoom, Brightness,
Sharpness Display
See Page 17.
/
OFF
FLD24
Can be changed
using the
/
OFF
button.
AUTO
1/10000
123
1
220
48
10
AUTO
DEF
ON
FUNCTION
OSD Format
Non display
1
Focus Mode
Automatic focus mode
Manual focus mode
Non display
No screen inverted
2
Mirror Mode
Screen is inverted to the left or right
3
Back Light
Non display
Back Light compensation off
Back Light compensation mode
Non display
White Balance AUTO
4
WBC Mode
Push Auto White Balance: In this mode
"Menu key" pressed, the white point traced
automatically (PWB Auto Mode), "Menu Key"
released, the white point preserved currently
(PWB Manual Mode).
Non display
5
Shutter
Normal shutter (NTSC:1/60 PAL:1/50)
1 / 125
Speed
8 variable.
1 / 10000
6
Camera ID
After input the identification number to each camera,
Multi-point control is available. (000~255)
7
Wait Mode
Indicates the camera stand-by mode.
Wait
until the camera power turns ON.
x 22
8
Zoom
: Optical Zoom only mode
Display
x 44
: Digital Zoom x 2 mode
x 220
: Digital Zoom x 10 mode
Sharpness
8.1
Adjustment
SHP
Mode Display
Brightness
8.2
Adjustment
Mode Display
9. Menu Format Table
NO
NAME
1
BACKLIGHT
Use to select BLC mode.
OFF ¤Ñ¤Ñ >ON
2
SLOW SHUTTER
Use under very low light condition for full color
surveillance.
OFF ¤Ñ¤Ñ >FLD2 ¤Ñ¤Ñ > ¤Ñ¤Ñ¤Ñ > FLD128
3
DAY & NIGHT
Use under low light condition for continuous
surveillance.
Auto ¤Ñ¤Ñ >ON ¤Ñ¤Ñ >OFF
.
4
WB CONTROL
AUTO : Maintain best color condition by controlling
the change of color automatically.
WB Range 2800¢ª K ~ 8000¢ª K
.
PUSH AUTO(PWB) : Can find White Balance exactly
--Turn the AUTO mode, WB acts automatically.
--Turn the PUSH AUTO mode, WB doesn't act.
5
SHUTTER
Use to select the shutter speed 8 steps.
NORMAL(NTSC:1/60, PAL:1/50),1/125,1/250,---,1/10000
6
CAMERA ID
To connect a large number of camera, identification
number can be assigned to each camera control easily.
(OFF, 1-255 : total number of ID is 256)
CAUTION : Set the ID number of camera, then
the ID number is displayed continuously.
7
ZOOM START
Use to change the zoom start position.
8
ZOOM STOP
Use to change the zoom stop position.
9
BRIGHTNESS
Use to change the brightness of scene (0~48).
10 SHARPNESS
Use to change the contour of scene (0~15).
.
11 FOCUS
AUTO : Set the focus mode to Auto mode.
.
PUSH AUTO : Set the focus mode to Push Auto mode.
.
12 PROTOCOL
DEF : Default
.
P / D : Pelco-D
13 INIT SET
Set the initial mode ON, the changed data are renewed.
Reset the data to its shipping condition.
D E S C R I P T I O N
x 10
x 18
17
COLOR VIDEO CAMERA
FUNCTION
in case precise WB maintenance
is needed under any environment.
19
COLOR VIDEO CAMERA