3onedata ES5026 Manuel de l'utilisateur - Page 17

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} 3onedata ES5026. 3onedata ES5026 20 pages. Gigabit managed poe switch

Imprimer la page

Power(W) Bar: the output power of specific ports are showed;

Class Bar: PoE output level is showed, "0" is defaulted, refers to" 0-13W";

"4-7W"; "3" refers to "7-13W"; "4" refers to IEEE 802.3at standard power output; "5/6" are undefined yet.

Status Bar: showing the PoE power supply state, connected / disconnected.Users can also check the state from

LED indicator on front panel(Slide the toggle switch to PoE side first).

5.6 Network Security

5.6.1 MAC Addresses

Users can check MAC address list or clear the list here. The MAC addresses can be dynamically learned or

statically configured, users can configure the MAC address mode. And the dynamical learning of MAC addresses

can be limited, users can configure the quantity of port learning MAC addresses.

5.6.1.1 MAC Dynamic Learning

This page enables to check MAC address information( dynamic MAC address list), users can clear the list as

needed. The fixed MAC address items can also be configured as static MAC addresses.

5.6.1.2 MAC Binding

The fixed MAC address items can be manually configured as static MAC addresses, please select VLAN

number and related Port number, if entered wrong number, there will be error prompt box displayed.

Picture5. 6.1.1 MAC Dynamic Learning

Picture5. 6.1.2 MAC Binding

User manual

"1" refers to "<4W"; "2" refers to