DSSA DSS-CBO64 Manuel - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} DSSA DSS-CBO64. DSSA DSS-CBO64 9 pages.

Imprimer la page

Testing Procedure Day Time Running Lights

Head Lights

Ignition Switch / Park Lights

1. Ensure the polarity of device connected to input

2. Inputs can be positive or negative switches

Configuration is done via DIP switch settings . Please

refer to installation manual .

1. Disconnect Battery before doing any connection.

2. Connect Momentary Switch 1 and 2 to the Safe Guard 64 General Input 1 and General Input 2

respectively.

3. Connect device to be operated by General Input 1 and General Input 2 to Safe Guard 64 General

Output 1 and General Output 2 respectively.

4. Ensure the polarity of Momentary Switch be Switch to Battery (STB).

5. Connect the Battery to Safe Guard 64.

6. Press Momentary Switch 1 once, the device connect to General Output 1 will switch ON/OFF status.

Press the button again to ensure that it will switch ON/OFF again.

7. Press Momentary Switch 2 once, the device connect to General Output 2 will switch ON/OFF status.

Press the button again to ensure that it will switch ON/OFF again.

8. If "General Input Selection" DIP switch setting is enabled, release the Park Brake, BOTH General

Output 1 and General Output 2 will switch OFF.

Supply Voltage

Input Voltage

S S

Digital witching ystems Australia

Input 6

Input 5

Input 4

Input 3

Input 2

Input 1

/output

Typical DRL Connection

Combo 64

Battery +

Battery -

Output 4 Common

Output 4 NC

Output 4 NO

Output 3

Output 2

Output 1

General Input Switch 1 & 2

Combo 64

Electrical Parameters

+12V to 24V Nominal (+28V Max)

0V to +24V

Battery +

Fuse

Battery -

Car Battery

Horn

D.R.L.

Combo 64