aTTo Digital LightREC Manuel de l'utilisateur - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} aTTo Digital LightREC. aTTo Digital LightREC 7 pages. Voice recorder
Imprimer la page
Charging
Make sure to have both of the USB parts clicked in together (both the mini USB and the
USB) and connect the recorder to your computer to charge. When the red LED indicator
is flashing the device is charging. When the LED stops flashing and stays lit the recorder
is fully charged. Once fully charged (typically in 1 hour), you can eject the device. It can
continuously work (in either recording modes) for about 27 hours on a full battery cycle.
Note : If during recording the red LED starts flashing, the battery level is low and you
should charge your device.
should cha
Recording while charging
The device can record and charge simultaneously. Please connect it to a power source
(a computer or a charger) and switch the button to "ON" position.
NOTE: During recording, partition of the recorder will not be visible on your computer.
You will need to disconnect the device from the computer, turn it off and then reconnect
it to be able to access the folder "RECORD".
Troubleshooting
1. If you connect the device to your computer and you don't see the LightREC's
partition : check if the ON/OFF button is in the OFF position.
2. If the device is not charging: Always check if the red LED indicator is visible when
the recorder is connected to your PC. Sometimes the computer can enter stand-by and
thus the USB port is unavailable for power delivery. Alternatively, you can charge the
recorder by connecting it to an USB charger – for example the one of a smartphone.
3. If you turn on the device and the blue LED is blinking fast: it means that the
memory of the recorder is full. Connect the device to your computer and free up some
space by either deleting audio files or moving them to another storage partition.