AddBike Carry'Box Module Manuel d'utilisation et d'installation - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} AddBike Carry'Box Module. AddBike Carry'Box Module 16 pages. Applicable to the addbike and addbike+
Également pour AddBike Carry'Box Module : Manuel d'utilisation et d'installation (18 pages), Manuel d'instruction (18 pages)
Imprimer la page
5. Using the Carry'Box module
Rules related to loading the Carry'Box
When loading the Carry'Box, you must be extremely careful for the load not to exceed the volume
provided for this purpose, i.e. the capacities defined by the module's textile. Make sure that:
The load is well stalled in the Carry'Box;
•
The load does not exceed the width and height of the Carry'Box;
•
The transported load does not interfere with the movement of the fork, wheels and
•
handlebars.
The authorized weight in the Carry'Box is 35 kg.
Do not transport sharp-edged objects in the Carry'Box as the fabric may be
damaged.
When carrying a load in the Carry'Box, check that the load is properly settled
and leaning on the backrest of the Base to avoid any movement of the load
while riding for this may lead to loss of control.
Do not transport children in the Carry'Box.
Riding the AddBike with load
Please read chapter 9.C of the "AddBike User's and Installation Guide»
6. Uninstalling the Carry'Box module
Take out the crossbar by removing the screws attaching it;
•
Detach the Velcros which hold the textile in place and make them pass on the other side of
•
the upper tubes in order to release them.
Remove the screws and nuts attaching the upper tubes to the backrest and take away the
•
upper tubes from the remaining structure;
Take out the textile by sliding it along the sheath;
•
Remove the screws and nuts attaching the bottom tubes to the seat and take away the
•
bottom tubes;
Put back the protective plastic caps, screws and nuts to their position on the seat and
•
backrest.
14
VERSION V4.1