ATTO Technology ATTO ExpressPCI FC 3300 Spécifications techniques - Page 2

Parcourez en ligne ou téléchargez le pdf Spécifications techniques pour {nom_de_la_catégorie} ATTO Technology ATTO ExpressPCI FC 3300. ATTO Technology ATTO ExpressPCI FC 3300 2 pages. 64-bit pci-x to 2-gigabit fc host adapter, sw optical lc sff interface
Également pour ATTO Technology ATTO ExpressPCI FC 3300 : Spécifications techniques (2 pages), Fiche technique (2 pages), Spécifications techniques (2 pages), Fiche technique (2 pages), Manuel d'installation et d'utilisation (17 pages)

Imprimer la page
ATTO Technology ATTO ExpressPCI FC 3300 Spécifications techniques
Hardware Specifi cations
Fibre Channel Interface:
• 2.125-Gigabit data-transfer rates
• 400 MB/sec. throughput in full-duplex mode
• Auto-negotiation between
2-Gigabit and 1-Gigabit speeds
• Short-Wave Optical LC connector
• Supports all Fibre Channel topologies
• Point-to-Point
• Arbitrated Loop
• Direct Fabric/Switch Attach
• Strict adherence to ANSI FC-AL-2, FC-PLDA
FC-Tape, and FC-FLA specifi cations
• Supports Class 2, Class 3 and Intermix
transfers
• Flash ROM for easy fi eld upgrades
Advanced FC Features:
• Support for SNIA HBA API
• LUN Masking
• Supports Target and Initiator Modes
Advanced SCSI-FCP Support:
• Large command FIFO
• Asynchronous I/O support
• ASPI and SCSI Manager 4.3 compatible
• SCSI-3 tagged command queuing
• Bootable from attached disks
• Support for multiple block sizes
Accelerated PCI Bus Management:
• PCI bus master rate of 528 MB/sec.
• PCI 2.2 compliant
• 64-bit/66 MHz PCI-X (backward compatible
with 32-bit and 33 MHz PCI)
Software Specifi cations
Driver Support:
• Windows® 2000
• Windows XP
• Windows Server 2003
• Solaris (x86 and SPARC)
• Mac® OS X
• Mac OS 9
Advanced Data Streaming (ADS™):
• Improved PCI system bandwidth use
• Optimized FC and SCSI-3 algorithms
• Tagged command queuing
• RISC processor for high performance
RAID kits available
F i b r e
©2004 ATTO Technology, Inc. Specifi cations subject to change without notice.
ATTO ExpressPCI FC 3300
Environmental & Physical
Characteristics
Dimensions:
• Full Form Factor: 4.200" x 6.521"
Operating Environment:
• Temperature:
0-50º C
• Humidity:
10-90% non-condensing
• Airfl ow:
100 LFM (min.)
Power:
• 1 Amp @ 5 Volts
PCI Signal Compatibility:
• 3.3 Volts/5 Volts universal
*Microsoft, Windows, and the Windows logo are trademarks,
or registered trademarks of the Microsoft Corporation in the
United States and/or other countries
Fibre Channel Host Adapter
Selection Chart
C h a n n e l
Confi guration:
• Easy to install connection plate with LED
to monitor on-line and fault status
LED indicates
fault
conditions
*
LED indicates
online status
Optical LC
connector
Rev 09/05