DT Research 340Q Manuel d'utilisation de base - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation de base pour {nom_de_la_catégorie} DT Research 340Q. DT Research 340Q 5 pages. Rugged tablet

Due to the size and weight, 340Q needs to be installed on cradle with stand to work
as floor control unit. Do not use 340Q while holding it by hand.
Shutdown 340Q between each usage or when moving the control stand to prevent
any risk of damage.
PACKAGE CONTENTS
One 340Q with Battery Pack and Handstrap
AC-DC Power Adapter with Power Cord
Basic Operation Guide
PRECAUTIONS
Always exercise care when operating and handling the 340Q.
Do NOT apply excessive pressure to the display screen.
We recommend using the Digital Pen (optional) to keep the screen clean.
Avoid prolonged exposure of the display panel to any strong heat source.
Wherever possible, the 340Q should face away from direct light to reduce glare.
If the AC-DC power adapter is used to recharge or power the tablet, do NOT use
any AC-DC adapter other than the one provided or acquired from the manufac-
turer or its partners.
In the unlikely event that smoke, abnormal noise, or strange odor is present,
immediately power off the 340Q and disconnect all power sources. Report the
problem to your device provider immediately.
Never attempt to disassemble the 340Q, as this will void the warranty.
NOTE:
To obtain protection consistent with any IP rating for the device, the I/O (audio,
power, USB, card reader, etc.) port doors must be closed. If the IP protection is
compromised by mishandling or misuse, such as by leaving port doors open or
improperly closed, any resulting product damage will not be covered under any
DT Research warranty.
2
A
B
D
G
C
3
F
Input/ Output Ports
Ethernet Port
A
USB 3.0 Port
B
DC-in
C
Audio Jack
D
Button Functions
BUTTON
ACTION
Power Button
1
Programmable Buttons
2
Battery Latch
*Push the switch to unlock the latch, then slide the latch left to remove the battery.
3
1
2
Battery Indicator
Power LED
B
E
3
Smart Card Reader
E
Tabletop Stand
F
Ethernet Port
G
3