3onedata IES2010 Series Manuel d'installation rapide
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} 3onedata IES2010 Series. 3onedata IES2010 Series 2 pages. Unmanaged industrial ethernet switch
Imprimer la page
IES2010 Series
Unmanaged Industrial Ethernet
Switch Quick Installation Guide
3onedata Co., Ltd.
Address:
3/B, Zone 1, Baiwangxin High Technology
Industrial
Park,
Xili,
Shenzhen
Website:
www.3onedata.com
Tel:
+86 0755-26702688
Fax:
+86 0755-26703485
【Package checklist】
Please check whether the package and accessories are intact
while using the switch for the first time.
1.
Industrial Ethernet switch
3.
Quick installation guide
5.
DIN-Rail mounting attachment
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.
【Product Overview】
This series are 100M/Gigabit unmanaged DIN-Rail industrial
Ethernet switch. Models as follows:
Model I.
IES2010-2GS (2 Gigabit SFP + 8 100M copper
ports)
Model II. IES2010-2GS-4F (2 Gigabit SFP + 4 100M fiber
ports + 4 100M copper ports)
【Panel design】
Rear view, Top view and Bottom view
Front view
Nanshan
District,
1.
DIN-Rail mounting kit
2.
Certification
2.
Grounding screw
4.
Warranty card
3.
Power supply input terminal block
4.
Power supply input status indicator PWR
5.
Port connection indicator
6.
100Base-FX Ethernet fiber port
7.
1000Base-SFP Ethernet SFP slot
8.
10/100Base-T(X) Ethernet copper port (including
indicator)
9.
10/100Base-T(X) Ethernet copper port
【Mounting Dimension】
Unit: mm
Attention before mounting:
Don't place or install the device in area near water or
moist, keep the relative humidity of the device
surrounding between 5%~95% without condensation.
Before power on, first confirm the supported power
supply specification to avoid over-voltage damaging the
device.
The device surface temperature is high after running;
please don't directly contact to avoid scalding.
【DIN-Rail Mounting】
For convenient usage in industrial environments, the product
adopts 35mm DIN-Rail mounting, mounting steps as below:
Step 1
Check whether the DIN-Rail mounting kit that
comes with the device is installed firmly.
Step 2
Insert the bottom of DIN-Rail mounting kit (one side
with spring support) into DIN-Rail, and then insert
the top into DIN-Rail.
Tips: