ATTO Technology ExpressPCI UL5D LP Manuel d'installation et d'utilisation - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} ATTO Technology ExpressPCI UL5D LP. ATTO Technology ExpressPCI UL5D LP 19 pages. Single channel ultra320 scsi, pci-x host adapter dual channel ultra320 scsi, pci-x host adapter dual channel ultra320 scsi, pci express host adapter dual channel ultra320 scsi, low-profile pcie host adapter
Également pour ATTO Technology ExpressPCI UL5D LP : Spécifications techniques (2 pages), Tableau de compatibilité (1 pages), Manuel de dépannage (12 pages)

Imprimer la page
ATTO Technology ExpressPCI UL5D LP Manuel d'installation et d'utilisation
Cables and devices must be chosen to maximize performance and minimize the electrical noise from the
high-speed data transfers available with the SCSI protocol. Cabling and termination methods become
important considerations.
Exhibit 3.1-1 The following table lists the maximum number of devices you may connect at specific cable distances
using differential and single-ended SCSI in various SCSI environments.
SCSI-1
Fast SCSI
Fast Wide SCSI
Wide Ultra/WIDE SCSI
Wide Ultra/WIDE SCSI
Wide Ultra/WIDE SCSI
Ultra2 SCSI
Ultra160 SCSI
Ultra320 SCSI

Setting up cables and termination

Use high quality Ultra 320-rated, well-insulated
SCSI cables to ensure error free communications.
Exhibit 3.1-2 Several internal and external cable
connectors.
The ExpressPCI Ultra320 SCSI host adapter
supports two types of SCSI signaling: Low
7
ATTO Technology Inc. ExpressPCI Host Adapter Installation and Operation Manual

3.1 Cabling and termination

Bus speed
Bus width
MB/sec. max.
bits
5
8
10
8
20
16
40
16
40
16
40
16
80
16
160
16
320
16
Max. bus lengths, meters
Single-ended
LVD
6
-
3
-
3
-
-
-
1.5
-
3
-
-
12
-
12
-
12
Voltage Differential (LVD) and Single-Ended.
Devices on the same SCSI bus must use the same
signaling, either LVD or Single-Ended.
To set up cabling and termination:
1
Determine whether you are using a single
channel or dual channel host adapter model.
One external connector indicates a single
channel host adapter; two external connectors
indicate a dual channel host adapter.
2
Determine if SCSI devices are going to be
installed internally or externally.
• Total bus cable length varies by host adapter
and type of attached devices. Refer to
Exhibit 3.1-1 for details on maximum cable
length.
• If you combine Wide 16-bit and Narrow 8-
bit devices on the same connector, connect
the Wide devices first (closest to the
connector).
• Refer to the documentation for your SCSI
devices to determine if they are Wide or
Narrow, UltraWIDE SCSI, Ultra2 SCSI,
Ultra160 or Ultra 320.
3
Determine which terminator to use
Max. device
support
HVD
25
8
25
8
25
16
25
16
-
8
-
4
-
16
-
16
-
16