DT Research DT362 Manuel d'utilisation de base - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation de base pour {nom_de_la_catégorie} DT Research DT362. DT Research DT362 4 pages. Mobile pos tablet

Imprimer la page

DT362

Button Management

Where supported by software, many of the hard buttons on the DT362 are

programmable to perform a function of the user's choice. The exception is the Power

Button and the SAS Button. To activate the button re-assignment application, invoke the

Button Manager application, e.g., in Windows XP Embedded

Brightness Control

Where supported by device ﬁrmware and software, a hard button may be engaged to

manipulate the display brightness. Press the System Menu button (Button 7) on the front

of the DT362. The System screen will display a Brightness control section with up and

down arrows that can be activated with the stylus.

Battery and Power Management

The DT362 is equipped with an internal 2200mAh Li-Ion battery pack that is capable

of supporting approximately 1.5–2 hours of continuous operation. With the optional

internal 3760mAh battery and an external battery pack that clips (hot-pluggable)

onto the back of the device, the maximum period of continuous operation will be

approximately 3–4 hours. The period between battery recharges can be signiﬁcantly

lengthened by putting the device into Standby mode through the Power Button (see

Buttons Function Table) whenever the device is not in use. Depending on the operating

software, the DT362 may also be conﬁgured to enter various power-saving modes via

the Power Button or through timed entry.

ENGLISH

Desktop Cradle

The DT362 is complemented by an optional Desktop Cradle for support, pass-through

charging, and connection to a range of USB peripherals, including keyboard and mouse.

The Cradle oﬀers the following interfaces: a DC-in port for the AC-DC adapter, an

Ethernet port, a VGA port (optional), and USB ports. Always seat the DT362 securely

onto the cradle. The cradle must be powered by the AC-DC adapter for the Ethernet and

USB ports to function. The battery packs on the DT362 may be recharged by connecting

the AC-DC adapter directly to the DC-in port on the DT362 or through the DC-in port on

the Desktop Cradle while the DT362 is docked to the Cradle.

USING THE DT362

Memory conﬁguration

The DT362 is available with 2GB memory conﬁguration. Storage options currently range

from: 2GB to 16GB ﬂash memory or 32GB to 64GB SSD.

Peripherals Support

Through its USB ports, the DT362 supports a wide range of USB-based peripherals.

These peripherals are applicable for software installation, applications storage, data

storage, and system software recovery and updates. The DT362 is also compatible with

custom mountable cradle options. These securable and mountable cradles provide an

interface to VESA mounts and arms, and to ports that may include USB, Ethernet and

pass-through power.

Remote Management

Depending on software conﬁguration, the DT362 can be centrally managed for asset

monitoring and for software control. Please consult your device provider.

ENGLISH