DT Research DT372 Manuel d'utilisation de base - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation de base pour {nom_de_la_catégorie} DT Research DT372. DT Research DT372 4 pages. Mobile pos tablet

Imprimer la page
DT372
The DT372
(with Windows XP Operating System)
Front View
Microphone
Wireless LED
Battery/Power LED
1
2
3
4
5
Calibration
Wireless Network Settings
Input/ Output Ports
A
DC Power Input
B
USB Port
C
Headphone Jack
Button Functions
(with Windows XP Operating System)
BUTTON
ACTION
Programmable
1
Programmable, launch soft (on-screen) keyboard (default)
2
Launch SAS (Secure Attention Sequence)
3
Generate Ctrl+Alt+Del keys to invoke the security windows defined under Windows XP
Programmable,
4
Change display orientation (portrait/ landscape) (default)
Programmable, system utility menu (default)
5
Power on,
Push/release typically enters Standby mode, or Push/release exits Standby mode or
6
restarts device (software dependent)
Push and hold (over 4 seconds) invokes hardware shutdown
Programmable,
7
As scanner trigger when equipped with the scanner module
2
ENGLISH
Rear View
6
Stylus
Battery and Power Meter
Button Management
Left
Right
Power/Battery LED Status:
•
Blue indicates the battery is 25% to 100% charged
•
Blinking blue indicates the battery is charging
•
Orange indicates that the battery is between 11% to 25%
•
Blinking Orange indicates that the battery is below 10%
Precautions
•
Always exercise care when operating and handling the DT372.
•
Do NOT apply excessive pressure to the display screen.
•
We recommend using the Stylus provided to keep the screen clean.
•
Avoid prolonged exposure of the display panel to any strong heat source. Wherever
possible, the DT372 should face away from direct light to reduce glare.
•
If the AC-DC power adapter is used to recharge or power the device, do NOT use any
AC-DC adapter other than the one provided with the device or acquired from the
manufacturer or its partners.
•
In the unlikely event that smoke, abnormal noise, or strange odor is present,
immediately power off the DT372 and disconnect all power sources. Report the
7
problem to your device provider immediately.
•
Never attempt to disassemble the DT372, as this will void the warranty.
A
B
C
THE DT372
Basic Features
The DT372 wireless tablet integrates a bright and responsive touch display, 1 USB
port, and embedded networking elements such as wireless LAN, Bluetooth or optional
3G. The primary device is complemented by a suite of accessories, including battery
expansion, docking cradles, and carrying cases, for a comprehensive user experience.
A DT372 typically integrates an 802.11a/b/g/n wireless LAN (WLAN) adapter that may
connect to other wireless devices or access points. If your DT372 does not come with
such a network adapter, please consult your device provider to establish the desired
network connectivity.
3
ENGLISH