DT Research 362MQ Manuel d'utilisation de base - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation de base pour {nom_de_la_catégorie} DT Research 362MQ. DT Research 362MQ 4 pages.
Imprimer la page
PRECAUTIONS
•
Always exercise care when operating and handling the 362MD/ 362MQ
•
Do not disassemble any portion of the 362MD/ 362MQ, as this will void any
product warranty.
•
Do not use any power adapter or charging cradle other than the one provided
with the tablet or acquired from the manufacturer or its partners.
•
In the unlikely event that abnormal noise, strange odor, or smoke is present,
immediately power down the 362MD/ 362MQ and disconnect all power sources.
Please report the problem to your device provider immediately.
The 362MD/ 362MQ
Input/ Output Ports
USB Type-C Port (power input)
A
Button Functions
BUTTON
ACTION
Power Button
1
2
Trigger Buttons
Battery Latch
3
B
C
2
A
2
Data Capture Modules
Barcode Scanner (optional)
B
Smart Card Reader (362MD only)
C
2
1
3
OPERATION
Powering ON and OFF
To activate 362MD/ 362MQ, push and quickly release the Power Button. The display
will come on in a few seconds. To put the 362MD/ 362MQ in standby mode, push
and quickly release the Power Button. To turn the 362MD/ 362MQ off for extended
storage, power off safely using any software function that "shuts down computer"
provided in the software operating system.
NOTE:
The battery packs shipped with your tablet may be low in power - please use the
AC-DC adapter with the 362MD/ 362MQ when setting up for the first time to
fully charge the battery pack.
NOTE:
To conserve power, push and quick release the Power Button to make the tablet
in standby mode while not in use. Pushing briefly on the same butt on will wake
up the system.
NOTE:
When the battery pack is charging, the blue-colored Battery LED should blink
slowly. If plugging in the AC-DC adapter does not trigger this blinking activity
and the LED stays dark, the battery pack(s) may have been drained substantially.
Unplug/ replug the AC-DC adapter to the 362MD/ 362MQ a few times to
activate the charging process.
NOTE:
For 362MD, avoid using the Power Button ("hold 4+ seconds" feature) to turn
off the tablet—this form of hardware shutdown is intended to be a means of
recovery from lockups, and not as normal operation.
3