DT Research DT522MD Manuel d'utilisation de base - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation de base pour {nom_de_la_catégorie} DT Research DT522MD. DT Research DT522MD 2 pages. Medical-grade integrated lcd system

Imprimer la page
DT517MD/ DT522MD
Packaging
•
The DT517MD/ DT522MD is packaged with recyclable materials
and designed for maximum protection in transportation and
handling.
•
When possible, please save the packaging carton and protective
inserts for re-use if there is ever a need to ship the DT517MD/
DT522MD.
Cleaning the anti-microbial enclosure
•
Use a soft/non-abrasive cloth moistened with water to clean the enclosure.
•
If using a cleaner, an alcohol-free and oxide-free cleaning liquid is recommended.
•
To prevent scratching the anti-microbial coating, please wipe gently
I/O Panels
Lower I/O Panel
The DT517MD/ DT522MD has a comprehensive set of I/O ports.
The following ports are located along the lower rear edge of the
display unit.
1.
Two (2) USB 2.0 ports
2.
COM ports
3.
Microphone-in jack
4.
Audio-out jack
5.
Two (2) USB 2.0 ports
6.
Ethernet port (RJ45)
7.
18.5V/ 3.5A DC-in jack
Side Panel Function Buttons
The side panel of the DT517MD/ DT522MD features power, and
programmable buttons.
2
ENGLISH
1
2
3 4 5
6
7
8
9
Button
Description
The three buttons are intended to be user programmable via software in
8. Programmable
applicable operating systems.
•
M
ay be configured to perform different functions, depending on the
software operating system.
•
D
epending on the OS, a brief, firm push will trigger software-enabled
entry into Shutdown or Standby modes. Push in similar manner to Restart or
9. Power
to exit Standby mode.
•
P
ush and hold for over 4 seconds to forcefully shut down the device. This
method of powering off should only be used when proper shutdown
through software is not possible.
Mounting
The DT517MD/ DT522MD is designed to be secured to VESA-compliant mounting arms or stands.
This is accomplished by equiping the standard metal base on the rear of the display unit. The
VESA-compliant mounting holes at the rear of the device will mate with VESA mounts or arms to
meet the requirements of the deployment.
1.
The display without the base.
3.
Cap the cover to the top of the
stand.
2.
Attach the stand to the display. Screw the
VESA-compliant bracket of the stand to the
display with four (4) screws.
3
ENGLISH