DT SWISS Ratchet LN Manuel technique - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel technique pour {nom_de_la_catégorie} DT SWISS Ratchet LN. DT SWISS Ratchet LN 19 pages.
Également pour DT SWISS Ratchet LN : Manuel technique (16 pages)

Imprimer la page

2.2 REQUIRED WEARING PARTS AND MATERIALS

Wearing parts / Materials

DT Swiss universal grease

DT Swiss special grease

2.3 REQUIRED TOOLS

Tools

tool for ring nut

installation cylinder Ø15 / 28 x 40 mm

NOTICE

RISK OF DAMAGING THE ADAPTERS!

To avoid damages, only use grind clamping jaws, aluminum clamping jaws or special tools to clamp the

adapters.

2.4 REMOVING THE END CAPS

1. Pull off both end caps by hand.

If the end caps cannot be pulled off by hand, clamp the

end caps carefully into a vise with ground clamping jaws

and pull the hub / wheel upwards.

Specification

Quantity

Specification

Article number

20 g

HXTXXX00NMG20S

20 g

HXT10032508S

Quantity

Article number

HXTXXX00N5027S

HXTXXX00N5042S