Airtopia KIT-T01 Manuels d'installation - Page 2
Parcourez en ligne ou téléchargez le pdf Manuels d'installation pour {nom_de_la_catégorie} Airtopia KIT-T01. Airtopia KIT-T01 2 pages.
Imprimer la pageemail support:
open the app:
app.airtopia.com
Existing Main Power
cabling between
indoor and outdoor
units
go to website:
www.airtopia.com
Ideal sensor
location is
1500mm above
oor in return air
path
CAT5/6 data cable
or a multicore cable
Optional
Aux input contact.
Optional Current Transformer (CT)
To use for Fan status it must be
clamped around the active cable
anywhere between the indoor and
Outdoor units.
To use to record power
consumption it must be clamped
around the active power cable on
the mains supply to the outdoor
unit from the electrical switch
board
OUTDOOR
UNIT
For the control of an air conditioner's functions from a
smart device or building automation system.
Refer to software installation guide or download app from
app.airtopia.com
Infra Red Transmitter
must be placed over
the indoor unit's IR
window to allow
Airtopia to control
the airconditioner
OPTIONAL
INTERFACE
CBUS
LAN
NETWORK
MAIN SUPPLY
VOLTAGE
from switchboard
Application Login - Quick Start Guide
1. Select Setting (top Right Hand Corner
2. Add Unit using ID and pairing code (located on
.
case label).
3. Use Unit Setting to Label your Device.
OPTIONAL
FEEDBACK
MODULE
C
oming Soon
LAN
4. Select remote brand and model
(if not on the list email [email protected] with A/C
. Brand and Remote Controller model number)
5. Set Flags and Field data for Sensors
6. Return to Unit
241013 Airtopia Installation Guidelines V2.2
Installation
Guidelines