bouncepad Flex Instructions de montage - Page 2

Parcourez en ligne ou téléchargez le pdf Instructions de montage pour {nom_de_la_catégorie} bouncepad Flex. bouncepad Flex 2 pages.
Également pour bouncepad Flex : Instructions de montage (2 pages)

Imprimer la page

Attach the Secure Tablet Case to the Flexible Mounting

Arm. Be sure to fully engage all screws in their threads before

tightening. Always use a hand screwdriver for this step.

Unlock and remove the face of Secure Case.

Lock the face of Secure Case back into place. Place the cable

end of the faceplate first, then squeeze the lock end while turning

the key.

Installation guidelines. To minimise glare on the screen, avoid installing the Bouncepad directly below a source of light.

Maintenance of your Bouncepad. To keep your Bouncepad looking its best, clean regularly with screen wipes.

toll free 1-888-423-3885 l local 1-617-275-8131 l www.thebouncepad.com l Bouncepad North America, Inc. 50 Terminal St, Unit 710, Building 2, 7th Floor, Charlestown, MA 02129, USA l

You can mount the case

portrait or landscape.

Feed the USB cable through the Flexible Mounting Arm

from above, straighten the Flexible Mounting Arm to help the

cable slide through more easily. Then connect to your power

supply.

Connect cable to Tablet and place into Secure Case. Your

Bouncepad is set up to house the tablet model specified in your

order. If you need to use a different tablet, please contact us for

a conversion kit.

Using the Surface Mounting Kit (alternative to points 1, 2 &

3). Attach the Surface Mounting Plate to the Flexible Mounting

Arm using M4 x 10mm Pin Torx Countersunk Screws. Then attach

the assembly to your surface using suitable screws (

plate cover fits on after the Flexible Mounting Arm is fixed.

Surface Mounting Kit

" diam.

11/64"

diam.

cable

diam.

channel

diam.

not to scale

(recommended height

from the ground to the

center of the screen)

). The