Absolute Process Instruments Cecomp F20B-M8 Manuel de démarrage rapide - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Absolute Process Instruments Cecomp F20B-M8. Absolute Process Instruments Cecomp F20B-M8 4 pages. Battery powered digital pressure gauges w. memory options & selectable units
Imprimer la page
Installation Precautions, Ranges and Engineering Units, Basic Operation
Types of Gauges
Gauge reference sensors always read zero with an open gauge port.
Ranges 1000 psi and higher use a 14.7 psi sealed reference sensor.
They are functionally similar to gauge reference sensors.
psi
Compound
inHg
0 to 14.70 psig vac
n/a
29.92 vac 760.0 vac 760.0 vac 406.8 vac 33.90 vac 235.1 vac
–29.92 inHg
–29.92 to
–14.70 to 15.00 psig
to 15.00 psi
30.54
–29.9 inHg
–29.9 to
–14.7 to 100.0 psig
to 100.0 psi
203.6
–29.9 inHg
–29.9 to
–14.7 to 200.0 psig
to 200.0 psi
407.2
0 to 3.000 psig
n/a
6.108
0 to 5.000 psig
n/a
10.18
0 to 15.00 psig
n/a
30.54
0 to 30.00 psig
n/a
61.08
0 to 60.00 psig
n/a
122.2
0 to 100.0 psig
n/a
203.6
0 to 200.0 psig
n/a
407.2
0 to 300.0 psig
n/a
610.8
0 to 500.0 psig
n/a
1018
0 to 1000 psig
n/a
2036
0 to 2000 psig
n/a
4072
0 to 3000 psig
n/a
6108
0 to 5000 psig
n/a
n/a
15.00 to 0 psi abs
n/a
30.54 abs 775.7 abs 775.7 abs 415.1 abs 34.61 abs 240.0 abs
30.00 to 0 psi abs
n/a
61.08 abs 1552 abs 1552 abs 830 abs 69.21 abs 480.0 abs
100.0 to 0 psi abs
n/a
203.6 abs 5172 abs 5172 abs 2767 abs 230.7 abs 1600 abs
Low battery symbol
4 digit display
Alphanumeric display
Zero display (gauge reference only)
Clear min/max, Up arrow for setup
Power button
Turn on backlight (BL versions)
Display min/max readings
Down arrow for setup
Installation Precautions
4 Read these instructions before using the gauge. Configuration may
be easier before installation. Contact the factory for assistance.
4 These products do not contain user-serviceable parts, except
batteries. Contact us for repairs, service, or refurbishment.
4 Gauges must be operated within specified ambient temperature
ranges.
4 Permanent installations must be indoors only. Outdoor or wash
down applications require installation in a NEMA 4X housing.
4 Use a pressure or vacuum range appropriate for the application.
4 Use fittings appropriate for the pressure range of the gauge.
4 Due to the hardness of 316 stainless steel, it is recommended
that a thread sealant be used to ensure leak-free operation.
4 For contaminated media use an appropriate screen or filter to
keep debris out of gauge port.
4 Remove system pressures before removing or installing gauge.
4 Install or remove gauge using a wrench on the hex fitting only.
Do not attempt to turn gauge by forcing the housing.
4 Good design practice dictates that positive displacement liquid
pumps include protection devices to prevent sensor damage
from pressure spikes, acceleration head, and vacuum extremes.
p Avoid permanent sensor damage! Do not apply vacuum to non-
vacuum gauges or hydraulic vacuum to any gauges.
p Avoid permanent sensor damage! NEVER insert objects into
gauge port or blow out with compressed air.
Gauges are not for oxygen service. Accidental rupture of sensor dia-
phragm may cause silicone oil inside sensor to react with oxygen.
Cecomp maintains a constant effort to upgrade and improve its products.
Specifications are subject to change without notice. See cecomp.com for
latest product information. Consult factory for your specific requirements.
WARNING: This product can expose you to chemicals including
nickel and chromium, which are known to the State of Califor-
nia to cause cancer or birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
C E C OMP
Div. of
Bipolar sensors read positive pressure and vacuum in the same
units, and zero with the gauge port open.
Compound ranges read inHg for vacuum and psig for pressure.
torr
mmHg
inH
O
ftH
2
2
–760.0 to
–760.0 to
–406.8 to
–33.90 to
775.7
775.7
415.2
34.61
–760 to
–760 to
–407 to
–33.9 to
5171
5171
2768
230.7
–407 to
–33.9 to
n/a
n/a
5536
461.4
155.1
155.1
83.0
6.921
258.6
258.6
138.4
11.54
775.7
775.7
415.2
34.61
1552
1552
830
69.21
3103
3103
1661
138.4
5171
5171
2768
230.7
n/a
n/a
5536
461.3
n/a
n/a
n/a
692.0
n/a
n/a
n/a
1153
n/a
n/a
n/a
2307
n/a
n/a
n/a
4614
n/a
n/a
n/a
6921
n/a
n/a
n/a
n/a
2.88"
88888
X X X X X
X X X X X
2
Zero/Clear
Memory
s
t
0.75"
¼" NPT
3.38" Standard
3.5" NEMA 4X
Power-Up and Normal Operation
Your gauge is ready to use. It was factory
calibrated just prior to shipment with bat-
teries installed.
Press and hold the center power button
for approximately 1 second. The display
is tested.
The full-scale range in the factory default
units is shown first. If the units were
changed by the user, then the full scale
range in the selected engineering units is
displayed next.
The display test is briefly shown again.
The actual pressure and units are displayed.
The gauge is ready for use with readings
updated approx. 3 times per second.
For gauge reference models occasional
flashing of the minus sign is normal and indi-
cates the gauge is at zero pressure. Absolute
gauges only display zero at full vacuum.
Display Backlighting (BL Models Only)
Display backlighting can be turned on by momentarily pressing
a button whenever the gauge is on. This also restarts the auto
shutoff timer.
F20BBL: The backlighting will turn on for 1 minute and then auto-
matically shut off.
F22BBL: The factory default on-time is 1 minute, but setup allows
setting it to 1 to 255 minutes, or to 0 to disable backlighting.
The red LED display backlighting will not be apparent under bright
lighting conditions.
A
A
P
P
BSOLUTE
BSOLUTE
ROCESS
ROCESS
O
oz/in
mmH
O cmH
O
g/cm
2
2
2
n/a
1033 vac 1033 vac 1.033 vac 1.000 vac 1013 vac 1.013 vac 101.3 vac .1013 vac
–235.1 to
–1033 to
–1033 to
n/a
240.0
1055
1055
–235 to
–1033 to
–1033 to
n/a
1600
7031
7031
–235 to
n/a
n/a
3200
48.00
2109
210.9
210.9
80.0
3515
351.5
351.5
240.0
n/a
1055
1055
480.0
n/a
2109
2109
960
n/a
4218
4218
1600
n/a
7031
7031
3200
n/a
n/a
4800
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
1055 abs 1055 abs 1.055 abs 1.021 abs 1034 abs 1.034 abs 103.4 abs .1034 abs
n/a
2109 abs 2109 abs 2.109 abs 2.041 abs 2068 abs 2.068 abs 206.8 abs .2068 abs
n/a
7031 abs 7031 abs 7.031 abs 6.805 abs 6895 abs 6.895 abs 689.5 abs .6895 abs
3.0"
NEMA 4X
Standard
1.65"
2.0"
88888
X X X X X
2
Zero/Clear
Memory
s
20 0 .0
psig
full
scale
88888
X X X X X
2
0.0
psig
1220 American Way Libertyville, IL 60048
I
I
NSTRUMENTS
NSTRUMENTS
Absolute reference gauges read zero at full vacuum. With an open
gauge port, their readings will vary due to continuously changing
barometric pressure.
kg/cm
atm
mbar
2
2
–1.033 to
–1.000 to
–1013 to
1.055
1.021
1034
–1.033 to
–1.000 to
–1013 to
7.031
6.805
6895
–1.03 to
–1.00 to
n/a
n/a
14.06
13.61
.2109
.2041
206.8
.3515
.3402
344.7
1.055
1.021
1034
2.109
2.041
2068
4.218
4.083
4137
7.031
6.805
6895
n/a
14.06
13.61
n/a
n/a
21.09
20.41
n/a
n/a
35.15
34.02
n/a
n/a
70.31
68.05
n/a
n/a
140.6
136.1
n/a
n/a
210.9
204.1
n/a
n/a
351.5
340.2
n/a
Zero the Display (Gauge Reference Only)
Absolute reference gauges do not use the zero feature since they
read atmospheric pressure under normal conditions.
Be sure the gauge is in the normal operating
mode. The gauge port must be exposed to
normal atmospheric pressure with no pres-
sure or vacuum applied.
Press and hold the Zero/Clear button.
Continue to press the Zero/Clear button until
oooo is displayed then release the button.
The gauge in now zeroed.
Occasional flashing of the minus sign with
zero pressure/vacuum is normal.
The stored zero correction is erased when
the gauge is shut off.
Shutoff
t
The auto shutoff timer starts at power up and resets whenever any
button is pressed. The default time is 5 minutes, but can be set for
a variety of times. If on/off operation is selected, the gauge will stay
on until manually shut off or the batteries are depleted. Turn gauge
off when not in use to conserve battery life.
When an auto shutoff time is used, the
OFF
display indicates
five seconds prior
to shutoff. Press the power button to keep
the gauge on.
To shut the gauge off manually, press and
hold (about 5 seconds) the center power
OFF
button until
is displayed.
Error or Out-of-Range Indications
Attempting to zero the gauge with pressure
greater than approximately 3% of full-scale
pressure or vacuum will result in an error
condition. The display will alternately indi-
cate Err 0 and the actual pressure. The
gauge must be powered down to reset the
error condition.
If excessive vacuum is applied to a pres-
sure-only gauge, the display will indicate
-Err until the vacuum is released. Applying
vacuum to a pressure-only gauge can dam-
age the pressure sensor.
If 112.5% over range pressure is applied
, an out-of-range indication of 1 – – – or
1.–.–.– will be displayed depending on model.
cecomp.com
800-942-0315
F20B, F22B
bar
kPa
MPa
–1.013 to
–101.3 to
–.1013 to
1.034
103.4
.1034
–1.013 to
–101.3 to
–.1013 to
6.895
689.5
.6895
–1.01 to
–101 to
–.101 to
13.79
1379
1.379
.2068
20.68
n/a
.3447
34.47
n/a
1.034
103.4
.1034
2.068
206.8
.2068
4.137
413.7
.4137
6.895
689.5
.6895
13.79
1379
1.379
20.68
2068
2.068
34.47
3447
3.447
68.95
6895
6.895
137.9
n/a
13.79
206.8
n/a
20.68
344.7
n/a
34.47
0. I
psig
Zero/Clear
Memory
s
t
hold
o
o
o
o
Zero/Clear
Memory
s
t
0.0
psig
O
F
F
Zero/Clear
Memory
s
t
hold
E
r r
0
E
r r
- or -