Addendum DES-3205 Manuel complémentaire - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel complémentaire pour {nom_de_la_catégorie} Addendum DES-3205. Addendum DES-3205 5 pages. D-link des-3205: supplementary guide
Imprimer la pageany other communication software.
the RS-232 port and the VT100 terminal emulation process, see
the Out-of-Band Management of this user's guide.
After a successful connection of the PC to the RS-232 port of the
Switch. At the setup screen, verify that all settings are in accord
with the settings shown on the front panel of the DES-3205 Switch
or the "DCE/DTE line setting" in the Out-of-Band Management
section of this user's guide.
The settings should be as follows:
Baud Rate
19200
Parity
None
Data bits
8
Stop bits
1
Verify that these settings are correctly entered in each field.
Incorrect settings could mean that VT100 terminal emulation
communication with the Switch might not be possible.
Pressing the Enter (Return) key should give you the EtherSwitch
Console Program main menu screen:
From this screen, perform the following steps to add entries to
your user defined MAC address table:
For more information about