DTM Print Primera AP550e Démarrage rapide
Parcourez en ligne ou téléchargez le pdf Démarrage rapide pour {nom_de_la_catégorie} DTM Print Primera AP550e. DTM Print Primera AP550e 2 pages. Label applicator
Imprimer la page
C
Label/Container Settings (for die-cut labels)
15. Access Label/Container Settings
15a
15b
Recall/
-
Recall/
+
-
Mode
Reset
+
Mode
Reset
Press "Mode" once.
When "F 0" is displayed hold "Mode" for
2 seconds to access Label/Container
Settings.
16. Sensor Calibration
16a
16b
Recall/
-
Recall/
-
Mode
+
+
Reset
Mode
Reset
Press "Recall/
"SC-" is displayed.
Reset" twice.
17. Platform Position
17a
17b
Recall/
-
Recall/
Mode
+
-
Reset
Mode
+
Reset
Press "Recall/
"PPo" is displayed.
Reset" twice.
18. Guide Position
18a
18b
Recall/
Recall/
-
-
+
+
Mode
Reset
Mode
Reset
Press "Recall/ Reset"
"gPo" is displayed.
once.
19. Start Labeling
Push here
Lower the Application Arm quickly until it touches
the container.
The platform will move toward you.
Maintain downward force on the arm until the
label is completely applied.
16c
Push here
Push down on arm until "0.00" is
displayed.
17c
17d
Recall/
+
Mode
Reset
Load the container.
Press and hold "+" or "-" to move
the platform to the desired label-
ing position.
18c
18d
Loosen the Thumb Screw
under the platform to adjust
the guide
Recall/
side-to-side.
Mode
Reset
Container
Press "Mode" to
Guide
store settings.
Thumb Screw
under platform
Free Technical Support!
Contact our DTM Print support team
via email at [email protected], by
phone at +49 611 92777-0 or use the
online live chat on our webpage
dtm-print.eu. This service is free for all
our customers.
074392-190225
Primera AP550e Quickstart
A
Unpack and Setup
Power Adapter
-
-
+
Power Cord
1. Remove the AP550e from its
packaging.
2. Remove all items from the supply box.
3. Place the unit toward the back of a
table with a depth of 76 cm or more.
4. Connect the power and switch on the
AP550e.
Power Switch
Power Input (12v)
76 cm or more