DTM System ZSP Rival 432 Manuel d'utilisation

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} DTM System ZSP Rival 432. DTM System ZSP Rival 432 4 pages.

Imprimer la page

I. Terms in use

Monostable output mode – turn on for programmed time after pushing the button

Bistable output mode – turn mode to opposite (turn on or turn off) after pushing button

Momentary output mode – turn on as long as the button is being pushed

II. General informations

Rival 432 receiver is one of remote control and access control devices that build ZSP System. Basic application of

ZSP System is to work with controllers of gate, rollers, also lightning, alarm system (direct connection to alarm line or

switchboard) and direct contol of devices such as entryphone, intercome, etc. as well.

Thanks to new, full programed functions, Rival 432 receiver come up to clients expectations. New

interface

and possibility of programming

III. Technical data

dynamically variable code Keeloq gives high class safety

superherterodine receiver, work frequency: 433.92 Mhz

reciver's memory containing 35 ZSP series remotes (NEO, TIP)

two separated NO relay outputs, working in mono-, bistable or momentary mode, max load for each output 1A/24V AC or

turn on time in monostable mode: from 0,5 sec and from 1 sec to 127 sec, bistable mode remembers last state before

power down

simple remote registering without need of using receivers buttons

possibility to lock easy remote registering function

discretion with ascribing remote buttons to receivers outputs

terminal block to switch aerial's concentric cable

splash – proof case IP-53

receiver suppy from 12 V to 24 V AC/DC

max current constription:1005mA (with two channels on and 24 V supply)

dimension: enclosure [mm] heigh 118, width 55, depth 27,5

working temperatures from -20° C to +55° C

IV. Receiver installation

1. Device description and installation

Rival 432 receiver contains of main board, the splash – proof case and aerial . Main board (fig.1) has

microprocessor control system of LED diodes and buttons, executive set on two relays, connectors of supply,connectors of

outside antenna and controled devices.

Strub aerial of 170 mm length is switched to aerial block in new receiver. To enhance radio range use outdoor aerial.

Outdoor aerial's concentric cable need to be switched to Y marked terminal block and ground marked terminal block.

Hints for making the radio range optimal:

neighbourhood of the energetic devices and metal elements will short the range

radio interferance from other sources will short the range

avoid wet and concrete walls for mounting the receiver

remember to remove old used batteries from remotes

mount the receiver's as high as possible

use the good quality coaxial cable for making the outdoor aerial

ZSP Rival 432

A radio receiver operating manual

more remote controls

increase product values.

MADE IN

POLAND

simplify programming