AtVideo ED2916 Manuel d'installation rapide
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} AtVideo ED2916. AtVideo ED2916 2 pages.
Imprimer la page
FRONT PANEL
Camera Buttons
HDD LED
Arrow Buttons
Play/Pause Button
PTZ/Zoom Button
Group/Sequence Button
Display Button
Panic Button
REAR PANEL
Video Input
Audio In/Out
Factory Reset Switch
Video Out
RS232 Port
RS485 Port
SYSTEM SETUP
After connecting the power cord, the unit will be operational in 60 seconds.
1.
*Note: There is no record button on the unit. Please refer to the
Record Setup section for the proper record settings.
Press the "Menu" button or move the mouse pointer to the top of the screen
2.
and then select
(Setup) in the Live Monitoring menu, enter the password
then press the
button. There is no default password when logging in the
admin user for the first time. To assure the secure management of the
system, setting up a password is strongly recommended.
System Setup
Go to "System -> General" to name the site location, assign a System
1.
ID number, select the language the screens are displayed in, display
software version number, upgrade the software, import or export the
DVR settings, show the System Log, clear all data and shut the
system down.
Go to "System -> Date/Time" to enter a new date and time.
2.
Go to "System -> User" to add and delete groups and users.
3.
Go to "System -> Storage" to display information about the DVR's
4.
storage devices.
Go to "System -> System Event" to check the system events and set
5.
the actions the DVR will take when it detects system events.
*NOTE: Before powering down the DVR (or logging out the current
user) highlight System Shutdown from the System – General menu
and press the
button, and confirm whether or not you want to
shut the system down (or logging out the current user).
ED2916 QUICK SETUP GUIDE
Feature and Functions
Alarm LED
Menu Button
Search Button
USB Connector
Alarm Input/Output
Network Port
Power Cord Connector
System
Device
Record
Network
Event
Notification
Camera
Display
1
Record Setup
Go to "Record -> General" to configure recording settings.
1.
Highlighting Recycle and pressing the
On and Off. In the Recycle mode, the DVR records over the oldest
video data once all available storage space has been used. When
Recycle is turned off, the DVR stops recording once all available
storage space has been used.
Go to "Record -> General" to configure recording settings. Highlight
2.
Use Panic Recording and press the
On
and Off. When setting to On, set the length of time of the duration,
images per second and quality for panic recording.
Go to "Record -> Schedule" to program the DVR to record only
3.
during certain times based on time, day of the week, and holidays.
Highlight Schedule On and press the
On
and Off. In the Schedule On mode, the DVR records video based
on the schedule established in the Schedule screen. When turning
Schedule recording Off, you will be asked to confirm your decision.
Panic recording will function even when Schedule is turned off.
4.
Select the schedule mode between Simple Mode and Advanced
Mode first. Highlight the + and press the
schedule
item, and highlight the box under the X heading and press the
button to delete the recording settings.
*NOTE: Refer to the User's Manual for each schedule mode
details.
Go to "Record -> Pre-Event" to set up pre-event recording. You can
5.
turn individual cameras On or Off for pre-event recording and set
the image speed, image quality, resolution and the amount of time
to record prior to the event (dwell). When the DVR is in the Time
or Time & Event mode, it ignores the pre-event settings and
follows the time settings.
Network Setup
Go to "Network -> General" to set the transfer condition for remote
1.
watch, limit bandwidth used to the remote site and configure the
WebGuard service.
Go to "Network -> LAN" to select the type of network configuration
2.
first then set up LAN parameters for the selected network
configuration.
Go to "Network -> WebGuard" to set the DVR accessible from a
3.
browser.
Event Setup
Go to "Event -> Motion, Alarm-In, Video Loss, Video Blind and Text-In" to
set up each event and set the actions the DVR will take when it detects
the event.
button toggles between
button to toggle between
button to toggle between
button to add a
v1.0