Atwood MPD 87860 Manuel de l'utilisateur

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Atwood MPD 87860. Atwood MPD 87860 1 pages. Atwood mobile products automobile accessories user manual

Imprimer la page

ENGLISH

Safety Symbols alert you to potential personal safety hazards.

Obey all safety messages following these symbols.

WARNING

avoid possible

injury or death

FOR YOUR SAFETY

READ ALL INSTRUCTIONS BEFORE INSTALLING HITCH BALL

Installer:

Provide this instruction to consumer.

Consumer:

Keep documents for future reference.

INSTALLATION

PERSONAL INJURY & PRODUCT DAMAGE

• The Atwood Ball is intended to be mounted on a drawbar or hitch

platform located at the rear of the tow vehicle.

• Do not weld ball.

• Orient wrench flats parallel to towing direction.

1. Attach hitch ball to a platform no less than 3/8˝ thick. Refer to TABLE 1

for maximum platform thickness.

2. Mounting hole must not exceed ball shank diameter by more than

1/16˝ thick.

3. Attach the drawbar with lock washer

with ball. Always use a lock washer and position next to nut.

4. Threaded shank must protrude beyond bottom of nut when tightened.

OPERATION

PERSONAL INJURY & PRODUCT DAMAGE

• Do not exceed the lesser of the tow rating of vehicle, hitch, ball,

coupler or trailer.

• Only use the hitch ball in conjunction with a socket type coupler

matching the ball size.

• Never attach a tow rope, chain, cable or stretch-type elastic rope

to ball for towing/pulling purposes.

• Replace ball if signs of cracking or flat spotting wear appear.

Replace at once any damaged or worn towing components if the ball

shows signs of cracking or flat spotting.

Check nut tightness every time the trailer is hooked up and at the

beginning of each towing day. Tow only if nut is tightened to specified

torque see TABLE 1.

CAUTION

avoid possible

injury and/or property damage

WARNING

1A and nut

-1B supplied

FIG

WARNING

LITERATURE NUMBER

•Installation •Operation •Maintenance

MAINTENANCE

1. Daily clean and lubricate ball and coupler with bearing grease to

minimize wear and friction. Lubricate moving or sliding parts with

S.A.E. 30 weight oil. Coupler must not bind on ball.

2. Check towing hitch, ball and coupler for signs of wear and damage

each time the trailer is hooked and at the beginning of each towing

day. Replace hitch ball if damaged or worn.

Should problems or questions arise, contact your dealer, the trailer

manufacturer or Atwood Service Department 1-574-262-2655. Contact

Atwood before having any warranty work done.

TABLE 1

84137

PART

2-5/16˝

BALL SIZE

(

)

40,000

BALL CAPACITY

(

560-600

TORQUE

3/4˝

MAX

PLATFORM THICKNESS

* The capacity of the ball is the maximum gross vehicle weight of the tow vehicle.

Atwood Hardware Systems & Components Limited Warranty

Atwood Mobile Products warrants to the Original Owner of Atwood Hardware

Systems & Components that Atwood will replace or repair any hardware systems

and components that are defective in material or workmanship under the following

conditions.

1. For two (2) years commencing with the date of purchase, Atwood, at their

discretion, will replace or repair any Hardware System & Components that are

found to be defective by Atwood in material or workmanship.

2. In the event of a warranty claim, the Original Owner must contact the Atwood

Consumer Service Department, 1120 North Main St., Elkhart, IN 46514,

Telephone: 574-264-2131 Fax: 574-206-9713. Warranty claim service must be

performed as approved by the Atwood Consumer Service Department. Warranty

replacement hardware systems and components or parts will be furnished freight

prepaid. Labor cost to repair or replace will be limited to the amount of the original

purchase price of the systems and components. The replaced warranty products

or parts become the property of Atwood Mobile Products and must be returned

to the Atwood Consumer Service Department freight prepaid, unless prior

arrangements have been made.

3. This limited warranty is valid only when the product is applied, installed, maintained

and operated in accordance with this Atwood Installation, Maintenance and

Operating Manual. Any deviation from these recommended specifications must

be approved in writing by Atwood.

4. Any implied warranties are limited to the duration of this limited warranty as

stated above. Atwood does not assume responsibility for consequential damage

or loss, including loss of use of vehicle, loss of time, inconvenience, expense for

gasoline, telephone, travel, lodging, loss or damage to personal properties, or

loss of revenues. Some states do not allow limitations on how long an implied

warranty lasts or limitations on consequential damages, so the above limitations

may not apply to you. This limited warranty gives you specific legal rights which

may vary from state to state.

MPD 87860

HITCH BALLS

Effective 11/21/07

80212

80202

82551

2-5/16˝

2˝

13,000

8,500

6,000

560-600

170-200

3/4˝

17/32˝

11/16˝

3/8" minimum

80201

2˝

5,000

170-200

11/16˝