Comtek COM-30VA Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Comtek COM-30VA. Comtek COM-30VA 8 pages. 30 meter vertical antenna

Congratulations! You are now the proud owner of a Comtek 30 Meter Vertical Antenna.

Specifications:

• Full band coverage on 30 meters with SWR under 1.5:1 No Tuner needed

• Power Handling up to 5 kW

• Weight: Approximately 11 pounds

• Element Tubing: 5 element sections sized from 2" OD to 1.5" OD

• 24 ft overall height

Parts List:

Aluminum Mounting Plate, 12" x 8" x 1/4", Drilled

Element Insulator,

Aluminum Cast Saddle 2.5", for Element Insulator

Stainless Steel U-Bolt 2.5", for Element Insulator

Hardware kit for U-Bolts (Nuts, Lock Washers, Flat Washers)

Studded Band Clamp, 2", with hardware (for Feedpoint Connection)

Element Clamp, Stainless Steel, for 1-5/8" and 1-3/4" antenna elements

Element Clamp, Stainless Steel, for 1-7/8" and 2" antenna elements

Stainless Steel Saddle for 2" V Bolts, for customer supplied mounting pipe

V-Bolt for 1 to 2" OD customer supplied mounting pipe

Black Vinyl Cap, for top of 1-1/2" OD antenna element

Aluminum Element - 1.500" OD x 36" x .058" Wall (split one end)

Aluminum Element - 1.625" OD x 72" x .058" Wall (split one end)

Aluminum Element - 1.750" OD x 72" x .058" Wall (split one end)

Aluminum Element - 1.875" OD x 72" x .058" Wall (split one end)

Aluminum Element - 2.000" OD x 72" x .058" Wall (split one end)

WARNING!

INSTALLATION OF ANY ANTENNA NEAR POWER LINES IS DANGEROUS

Warning: Do not locate the antenna near overhead power lines or other electric light or power

circuits, or where it can come into contact with such circuits. When installing the antenna, take

extreme care not to come into contact with such circuits, because they may cause serious injury or

death.

Description

, 2.5" OD x 2" ID x 2" long, Split

EXTREN

- 2 -

QTY