Comtrend Corporation GS-7316 Manuel d'installation rapide - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Comtrend Corporation GS-7316. Comtrend Corporation GS-7316 4 pages. 16-port gigabit ethernet switch
Également pour Comtrend Corporation GS-7316 : Manuel d'installation rapide (2 pages)
Imprimer la page
B
Basic Setup
1. Power On the Switch by plugging it into the power outlet. The POWER LED turns on when the switch is receiving
power.
2. Using an Ethernet cable, connect your Network device (Modem, Router or Access Point) to any port on the
switch.
3. Connect the Switch to other Internet-Enabled Devices.
Internet- Enabled
Devices
Laptop
PC
C
You Have Successfully Installed Your Gigabit Ethernet Switch
D
Troubleshooting
The following information should help you diagnose basic setup or installation problems.
1) POWER Indicator is OFF: If the POWER LED goes off, please make sure that your power outlet is working properly
(perhaps by testing with another device). Then plug in your GS-7316 again. If the Power Indicator does not light up,
please contact your equipment supplier for further information.
2) NETWORK LED is OFF: If a LAN LED fails to light up, check that the LAN port of the Switch is connected firmly to the
LAN port of the other device. To check the condition of the Ethernet cable, use another cable to test the same
connection.
FOR MORE HELP: For instructions on advanced features, FAQ, etc., please visit our product online at:
http://us.comtrend.com
For more information:
YouTube Channel:
https://www.youtub.com/user/ComtrendConnection
Facebook:
https://facebook.com/Comtrend
Website:
http://us.comtrend.com/
Support: Visit our website or call 1-877-COMTREND (1-877-266-8736)
Step 3
Step 1
AC Power
Network Device
(Modem, Router, or
Access Point)
Step 2
2