AU Xperia Z3 SOL26 Manuel de base - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel de base pour {nom_de_la_catégorie} AU Xperia Z3 SOL26. AU Xperia Z3 SOL26 3 pages.
Imprimer la page● Do not forcefully press your fingernails or hard objects against keys or
● This product uses liquid crystal for its display. The display response speed
display surface. Doing so might cause scratching or damage.
may become slow when the ambient temperature is low, which is due to the
The touch panel is designed to be lightly touched by fingers. Do not apply
property of liquid crystal and not a malfunction. The display response
strong pressure with your fingers or sharp-pointed objects (such as
speed will return to normal at room temperature.
fingernails, ballpoint pens and pins) on the touch panel.
● Although the display used on the product is made using high-precision
Touching the panel may not work in the following cases. Note that it may
technology, some pixels (dots) might be lit or out at all times. This is not a
cause malfunction.
malfunction.
・Operation with fingernails
● Take care not to inconvenience people around you when you use the
・Operation with foreign object on the screen
product in a public place.
・Operation with protective sheet or seal on the screen
・Operates when the display is wet or fogged
● You are recommended to store copies of individual data such as photos
・Operation with wet or sweaty fingers
you took, videos and music on your PC by sending each file as mail
・Operation under water
attachment, etc. Note, however, that you may not be able to make copies of
any copyrighted data even by the above-mentioned means.
● Do not remove the stickers printed with the IMEI on the nameplate.
● Take care not to place magnetized items such as magnetic cards,
● Never use modified au cell phones. Use of a modified device violates the Radio
speakers and TV sets near the product, as it might cause malfunction.
Law.
Putting a strong magnetism close to the product might cause false
This product has acquired the certification of conformity with technical
operation.
regulations for the specified radio station based on the Radio Law, and the
"Technical Conformity Mark
" is checkable on au phone as a certificate.
● When you put the product in your pocket or bag, take care so that the
Checking procedure: From the Home screen, [
]→[Settings]→[About
display does not come in contact with metal objects or other hard objects,
phone]→[Legal information]→[Certificates]
as it might cause scratching or damage. Also, be careful not to scratch or
If the screws of the product are removed and modifications are made to the
damage the display by using a strap whose metal or other hard part comes
internal components, the certification of conformity with technical regulations will
in contact with the display.
become invalid. Never use the product without the valid certification. Doing so
● When suddenly brought into a warm place from a cold place, or when in a
violates the Radio Law.
humid location, or when used where temperature suddenly changes (e.g.
● To prevent unlawful modification, the product has been designed so that it
near the air discharge port of an air conditioner), water droplets (i.e.
cannot be easily disassembled. Modifying the product is prohibited by the
condensation) sometimes are formed inside the product. Note that when
Radio Law.
used under conditions such as this, the humidity might cause corrosion or a
fault.
● Contents saved in the product, such as contacts and Album data might be
altered or lost in an accident, fault, repair or mishandling. Be sure to keep a
● When wiping the display, wipe with a soft, dry cloth. Use of a glass cleaner
copy of important contents. Note that the Company assume no responsibility
or other similar liquid might cause a fault.
for any damages or lost profits resulting from altered or lost contents.
● When connecting the external device to the microUSB connection terminal or
● Note that contents data (both charged or free content) saved with the
headset connection terminal, insert/remove the external device connector
product cannot be returned to the customer when the product is replaced
and plug straight to/from the microUSB connection terminal or headset
for repair of a fault, for example.
connection terminal. Failure to do so might cause damage or a fault.
u
Available Security Codes
PIN code
The product has various security codes that you can use.
■ PIN code
The available security codes are as follows. Do not forget the various security
To prevent unauthorized use of the au Nano IC Card (LTE) by a third party, you
codes that are set as they are necessary for various operations and contracts.
can set the product to require PIN code entry each time the power is turned on.
● Security code
If the PIN code is incorrectly entered three times consecutively, the PIN code
will be locked. You can unlock the PIN code using PUK code.
a To do remote operation of voice mail and call forwarding
Example of
･ Entering PIN code is not required by default state. In "Set up SIM card lock",
usage
services from a landline phone
b To use Customer Service Center and to do various inquiries,
however, you can change the setting requiring to enter PIN code. Note that
setting up SIM card lock requires entry of PIN code.
apps, and modifications on the au homepage
･ PIN code is set to "1234" by default state. In "Change SIM PIN", however, you
Initial value A four digit number chosen by the customer and noted on the
can change the PIN code to any four- to eight-digit number as necessary.
app form
･ PIN code is not reset by initializing the product.
● Setting screen lock
■ PUK code
Example of
To set and release the screen lock
In case the PIN code is locked, you can unlock it by entering the PUK code.
usage
･ PUK code is an eight-digit number given at the time of purchase, and is
printed on the back side of the plastic card on which your au Nano IC Card
Initial value Swipe
(LTE) is attached.
● PIN code
･ After entering the PUK code, you need to set a new PIN code in "Change SIM
PIN".
Example of
To prevent unauthorized use of the au Nano IC Card (LTE) by
･ If the PUK code is incorrectly entered ten times consecutively, contact an au
usage
third parties
shop, PiPit or Customer Service Center.
Initial value 1234
● Lock No. (NFC/Osaifu-Keitai lock)
Notes on waterproof and dustproof properties
Example of
To set the "NFC/Osaifu-Keitai lock setting"
This product has a waterproof property equivalent to IPX6*
usage
as a dustproof property equivalent to IP5X*
Initial value 1234
connection terminal cover, microSD memory card/au Nano IC Card (LTE) slot
cover are securely attached (based on in-house testing). Specifically, you can
make calls holding the product with wet hands in the rain (less than 20 mm per
hour) without an umbrella, as well as use the product in a place with water such
as a bathroom or kitchen. Before using the product, thoroughly read "Important
items to remember before use" and "Tips for comfortable use" to ensure correct
use. Failure to follow the contents described in these sections may cause the
intrusion of water, sand or other foreign material, resulting in overheating,
ignition, electric shock, injury or a fault.
B
･ Charging
a
Never charge the battery if the product is wet. The supplied and optional
accessories are not waterproof/dustproof.
･ Waterproof property
Do not use the product in places where it may be sprayed with high-pressure
water (e.g. near a faucet or showerhead) or submerge it in water for extended
periods of time, as the product is not designed to withstand high water
pressure. Also, do not expose the product to a water flow stronger than the
b
specified flow rate (i.e. 6 liters per minute from a faucet or showerhead, at
which you might even feel pain in the skin). Doing so might cause a fault, even
though the product has a waterproof property equivalent to IPX5. Do not wash
the product in a washing machine or ultrasound bath.
The product does not float on water.
･ Heat resistance
c
Do not use the product in places where boiling water may splash on it, in
saunas or near hot air (e.g. hairdryer). The product is not resistant to high
temperatures.
･ Shock
This product is not resistant to shock. Do not drop the product or subject it to
shock. Also, do not jab the earpiece/speaker, microphone/speaker, second
microphone, headset connection terminal or strap hole etc. with a cotton
d Place a dry towel or cloth under the product and leave them for a couple of
swab or any sharp object. Doing so might damage or deform the main unit
hours at room-temperature to dry.
causing water leak or dust penetration.
* If the product is not dried enough, you cannot hear the sound easily.
Leave the product enough time to dry before use.
■ Draining water after wetting the product
As some parts of this product are not watertight. if you use the product after it
■ Precautions on charging
gets wet, water remaining in those parts might wet your clothes or bag, or the
The supplied and optional accessories are not waterproof/dustproof. Check
sound might become hard to hear. Follow the steps below to drain water.
the following before and after charging.
a Wipe off water on the product with dry cloth, etc.
･ Never charge the battery if the main unit is wet. Doing so might cause electric
b Hold the product firmly and shake it approximately 20 times as shown.
shock or short circuit resulting in a fire, burns or a fault.
* When shaking the product, check the safety around you and hold it firmly
･ Check that the main unit is not wet. If you are charging the battery just after
enough not to drop it.
the product gets wet, drain water well and wipe the remaining water off with
c If water flows out from inside of the product, wipe it off with a dry cloth etc.
a clean dry cloth before placing it in the desktop holder or opening the
* Water left on earpiece/speaker, microphone/speaker or second
microUSB connection terminal cover.
microphone is not easily wiped off. Face the product downward and push
･ If you charge the battery with the microUSB connection terminal cover open,
it on a cloth to wipe off the water.
be sure to tightly close the cover when charging is finished. We recommend
using the desktop holder to charge the battery to prevent water leak or dust
penetration from entering from the microUSB connection terminal.
I
● Note that applying excessive force with the external device connected to
the microUSB connection terminal or headset connection terminal might
cause damage.
● Do not discard the product together with regular trash. Please cooperate in
the collection of the product when it is no longer needed to protect the
environment and effectively use resources. Old products are collected at
au shops and other places.
● Insert only a microSD memory card into the microSD memory card slot on
the product.
● Do not exert excessive force when attaching/removing a microSD memory
card. Doing so might injure your hands or fingers.
● While reading/writing data, do not subject the product to vibration or
impact, pull out microSD memory card, force-quit, or turn off the power.
Doing so might cause loss of data or a fault.
● When hearing the other party's voice, make sure that the earpiece is
placed at the center of your ear. If the earpiece (audio output port) is
closed by the ear lobe, it may be hard to hear the voice.
● Even if you cover the microphone or speaker to make your voice inaudible
to the other party, the other party can hear your voice.
● When using handsfree call, take care to keep the speaker at a safe
distance from your ears, as the speaker volume may be too loud.
● Do not cover the proximity sensor with your finger or put a sticker on it.
Doing so might hinder the proximity sensor from detecting the ambient
brightness and functioning correctly.
● Do not put a sticker, etc. on the proximity sensor. Doing so may cause the
sensor to malfunction and make the display always turned off while
receiving a call or during a call.
● Do not apply excessive force to the product during use. Note that applying
excessive force to the product such as swinging or carving the product
body cause malfunction or damage.
● Do not forcefully pull microUSB connection terminal cover, microSD
memory card/au Nano IC Card (LTE) slot cover. It might cause damage.
● While watching TV, the product becomes hot. Be careful when touching the
product with your hands or face.
v
*1 IPX5 equivalent means that the product will maintain its operability as a
phone even if it is sprayed with water from a 6.3 mm diameter nozzle at a
distance of about 3 meters for more than 3 minutes at a rate of about 12.5
liters per minute from any direction.
*2 IPX8 equivalent means that the product will maintain its operability as a
phone with no water getting inside the main unit even if it is gently
submerged in a tank of still tap water at room temperature to a depth of 1.5
meter for about 30 minutes.
*3 IP6X equivalent means that the product will securely maintain its function of
no grit and dust getting inside the main unit even after it has been placed in
an apparatus with grit and dust of diameters of 75 μm or less and shaken
for 8 hours.
Since operation of the product on each usage scene was confirmed based on
the above assumption, proper operation of the product in every possible
condition during actual use is not guaranteed. Malfunctions determined to be
caused by mishandling by the customer are not covered by the warranty.
Important items to remember before use
a Make sure that the microUSB connection terminal cover, microSD memory
card/au Nano IC Card (LTE) slot cover are firmly closed.
・Waterproofness/dustproofness is only effective when the covers are
securely closed.
・Just a small particle (a hair, etc.) between contact surfaces can cause
water leak or dust penetration.
・Do not open/close the microUSB connection terminal cover, microSD
memory card/au Nano IC Card (LTE) slot cover if the main unit or your
hands are wet.
1
2
and IPX8*
, as well
・Do not connect Sony Mobile TV antenna cable 02 or earphones to the
3
on the condition that the microUSB
product when it is wet by water. Doing so may cause a fault.
・When closing each cover, after stowing the cover hinge, press the entire
cover with the flat part of your finger. Then, trace the cover to ensure that
the cover is not partially open.
C
･ Do not touch the specified charging equipment or desktop holder with wet
hands. Doing so might cause electric shock.
･ Do not splash water over the specified charging equipment and desktop
holder when using them. Do not use them near water such as in a bathroom,
shower room, kitchen or washroom. Doing so might cause fire, electric shock
or a fault. Do not bring them into a bathroom, etc. even when you are not
charging with them. Doing so might cause fire or electric shock, injury or a
fault.
Notes on using Bluetooth
®
/wireless LAN
®
(Wi-Fi
) functions
®
®
･ The Bluetooth
and wireless LAN (Wi-Fi
) functions of this product conform to
domestic, FCC standards and EC Directive, and has been certified.
･ The 2.4 GHz band used by wireless LAN (Wi-Fi
®
) and Bluetooth
®
devices is
shared by various other devices. For this reason, the communication speed
and connectable range may be decreased, or disconnection may occur, due
to interference from other devices.
･ Do not use this product in places where electromagnetic waves are
generated or near electric products, AV and OA equipment, or other
magnetized devices.
･ Subjecting this product to magnetic or electrical noise might increase noise
and prevent it from performing communications. (This product is particularly
susceptible to noise when it used near a microwave oven.)
･ Using this product near a TV, radio or similar appliance might cause reception
interference and disrupt TV images.
･ The searching might not be successful if there are multiple wireless LAN (Wi-
Fi
®
) access points near to the product or the same channel is being used.
･ Use of cell phones on board is restricted. Follow the instructions of each
airline.
･ The communication speed and connectable range vary depending on the
distance between communication devices, obstacles and the Bluetooth
®
wireless LAN (Wi-Fi
) devices used.
J
● Note that when the shooting screen is displayed continuously for a long
● The internal battery gradually discharges after charging even if the product
time for still image shooting, video shooting, or TV watching, parts of the
is not used. The internal battery may discharge completely after long time
main unit may get warm, and that contact by your skin with these parts for a
no use. Charge before using.
long time might cause low-temperature burns.
● Do not store the product under the following conditions. They might cause
● Do not use the product while driving a car, etc. Using functions such as
degradation of performance or service life of the internal battery.
mail and camera other than talking on the phone with a handsfree kit might
・Fully charged (soon after completion of charging)
cause a traffic accident and is prohibited by law.
・Empty (the product does not turn on)
・In high-temperature and humidity
● Inserting a metal earphone jack accessory into the headset connection
terminal might cause the nonconformities.
● Charge the battery before using the product for the first time after
purchase, or if you have not used the product for a long time.
■ Display (Touch Panel)
● The internal battery is a consumable item. If the performance of a battery
● Use your finger to operate the touch panel. Do not use ballpoint pens,
does not recover after charge, the battery is at the end of service life, so
pencils or other sharp-pointed objects. Using such objects does not only
stop using it. The battery is built into the product. For repair, the product
hinder correct operation of the touch panel, but also might cause
must be collected to au shop etc. and charges will be incurred. And you
scratching or damage to the display.
may not use the product during certain period of time. Please be
forewarned. Note that the length of service life varies depending on the
● Do not put stickers or sheets (e.g. commercially available protective films,
usage condition, etc.
peep prevention sheets) on the display. Doing so might hinder correct
operation of the touch panel.
● Internal batteries sometimes swell up as they approach the end of their
service life. This is due to the properties of lithium-ion batteries, and is not a
● Do not operate the touch panel with fingernails. Doing so might result in
problem in terms of safety.
split nails or jammed fingers.
● If the display surface is dirty or wet with sweat or water, it may not function
■ Charging equipment
correctly. In such case, wipe the display surface with a dry, soft cloth.
● When not using the specified charging equipment (sold separately),
● Note that pressing the touch panel forcefully may cause malfunction or damage.
remove the plug from the power outlet.
● When carrying the product in your pocket or bag, take care not to put the
● Do not wrap the cord of the specified charging equipment (sold separately)
touch panel close to metals or other conductive materials, as it might cause
around the adapter itself. Failure to do so might cause electric shock,
false operation of the touch panel.
overheating, fire, fault or injury.
■ Internal battery
● Do not forcibly bend the charging equipment's plug or the connection
between the connector and cable. Doing so might cause electric shock,
● Use in very hot or cold environments, for example, when left in an
overheating, fire, fault or injury.
automobile with the windows closed in summer, will cause the battery
capacity to drop and shorten the available battery usage time. This will also
■ au Nano IC Card (LTE)
shorten the internal battery's service life. Try to use the product as far as
● The au Nano IC Card (LTE) is lent to you by au. In case of loss or damage,
possible at room temperature.
the card will be replaced at your expense. When a malfunction is
suspected, or in case of theft or loss, contact an au shop or PiPit.
w
x
b Do not immerse the product in water with
In the shower: You can make calls holding the product with wet hands while
soap, detergent or bath salts in it.
taking a shower.
c Do not immerse the product in seawater, a
･ Avoid spraying the product with high-pressure water, as the product is not
swimming pool or hot spring.
designed to withstand high water pressure.
d Do not immerse the product in any liquid
Washing: You can wash the product under a mild flow (less than 6 liters per
Soap/detergent/
Seawater
(alcohol, juices, etc.) other than fresh water
minute) of tap water at room temperature (5℃ to 35℃) at a distance of about
bath salts
and tap water of room-temperature (5-35 ℃).
10 cm from the faucet or showerhead.
e Do not place the product directly on the sand
･ Do not spray the product with high-pressure water or submerge it in water for
at a beach, etc. Grains of sand or other small
extended periods of time, as the product is not designed to withstand high
particles might get into earpiece/speaker,
water pressure.
microphone/speaker or second microphone
･ Make sure to hold the microUSB connection terminal cover, microSD memory
causing the volume to drop. And if sand gets
card/au Nano IC Card (LTE) slot cover so that they do not open, wash the
Hot spring
Sand/dirt
inside the product's main unit, it might cause
product with your hands. Do not use a brush or sponge.
overheating or a fault.
･ Do not wash the product in a washing machine or ultrasound bath.
f Do not use the product underwater.
･ Do not splash the product with or immerse it in soap water, detergent water,
g Do not leave the product in a humid place such as a bathroom or kitchen for
etc. other than tap water.
an extended period of time.
In the bath: You can use the product in a bathroom. Although you can make calls
with wet hands, do not immerse the product into a bathtub. The product is not
Tips for comfortable use
resistant to high temperatures.
･ Do not use the product in a bathroom for an extended period of time. The
･ Once the product gets wet, water may remain in gaps on the main unit. Shake
the product well to drain water. Especially make sure to drain water remaining
product is not moistureproof.
･ Do not immerse the product in hot spring water, soap water, detergent water,
in headset connection terminal, power key, volume key and camera key parts.
or water with bath salts in it. Also, do not use the product underwater. Doing
･ Even after the water is drained, the inner parts might still be wet. Although you
can use the product, do not place it near things that must not get wet. Take
so may cause a fault.
･ Extreme changes in temperature cause condensation. Wait until the main unit
care not to wet your clothes, bag or contents of the bag.
･ Drain water if it becomes temporarily hard to hear the sound due to water
reaches room temperature before you bring the product from a cold place
remaining in earpiece/speaker, microphone/speaker or second microphone.
into a warm bathroom.
･ If condensation occurs inside the display, leave the product at room
■ Notes on various usage scenes
temperature for a while until the condensation is cleared.
In the rain: You can make calls holding the product with wet hands in the rain
･ Do not splash the product with hot water. The product is not resistant to high
without an umbrella.
temperatures.
･ The rain in this case means a moderately-heavy rain (less than 20 mm per
･ Do not bring the desktop holder into a bathroom.
hour).
･ Use within an ambient temperature range of 5 ℃ to 40 ℃ (temporary use at 36
･ Water drops on the display might cause errors in the touch panel operation.
℃ to 40℃ in bathroom etc. allowed) and humidity range of 35% to 90%
･ Never open/close the microUSB connection terminal cover, microSD memory
(temporary use at 86% to 90% in bathroom etc. allowed).
card/au Nano IC Card (LTE) slot cover if the product is exposed to rain, or
your hands are wet.
D
E
from the network. If connection fails, stop using either of the Bluetooth
2.4 GHz frequency band precautions
wireless LAN (Wi-Fi
The frequencies used by the Bluetooth
®
and/or wireless LAN (Wi-Fi
®
) function
®
Bluetooth
and wireless LAN (Wi-Fi
of this product are in the 2.4 GHz band. In this frequency band, other similar
in the 2.4 GHz band.
wireless stations, in-plant wireless stations for mobile unit identification that
require a license to use, such as factory production lines, specific small power
wireless stations that do not require licenses, amateur wireless stations
(collectively called "other wireless stations" from here on) are operated in
● Bluetooth
®
addition to home electrical appliances such as microwave ovens, devices for
This product uses the 2.4 GHz band. FH4 uses FH-SS as the modulation
industrial, scientific and medical devices.
scheme. The interference distance is about 40 m or less. XX8 uses another
1. Before using this product, make sure that "other wireless stations" are not in
modulation scheme. The interference distance is about 80 m or less.
operation nearby.
● Wireless LAN (Wi-Fi
2. In the event that instances of radio wave interference have occurred
This product uses the 2.4 GHz band. DS-SS and OFDM are used as the
between this product and "other wireless stations", immediately either
modulation schemes. The interference distance is about 40 m or less.
relocate this product or stop operation of the device (stop the emission of
radio waves).
3. If you are unclear on any points or are troubled by anything, contact an au
･ This means that all bandwidths of 2.4 GHz band can be used, and that band
shop or Customer Service Center.
of mobile unit identification devices can be avoided.
･ The connections between this product and all other Bluetooth
®
and wireless
･ Available channels differ depending on the country.
LAN (Wi-Fi
®
) devices have not been confirmed. Therefore, connections with
･ For use in an airplane, check with the airline company in advance.
®
®
all Bluetooth
and wireless LAN (Wi-Fi
) devices are not guaranteed.
･ This product supports security features for wireless communications that are
5 GHz frequency band precautions
compliant with the Bluetooth
®
and wireless LAN (Wi-Fi
®
) standard
Wireless LAN (Wi-Fi
specifications, but the security may not be sufficient depending on the usage
GHz band and 5.3 GHz band outdoors is prohibited by the Radio Law.
environment and configuration. Be careful when making data communication
The channels used on the product are as follows.
®
®
using Bluetooth
or wireless LAN (Wi-Fi
) function.
･ W52 (5.2 GHz band/36, 40, 44, 48 ch)
･ Wireless LAN (Wi-Fi
®
) has the advantage that it can be freely connected
･ W53 (5.3 GHz band/52, 56, 60, 64 ch)
anywhere within the radio wave range, as it uses radio waves for exchanging
information. At the same time, there is a risk that a malicious third party may
･ W56 (5.6 GHz band/100, 104, 108, 112, 116, 120,
obtain unauthorized access if security settings have not been configured. You
124, 128, 132, 136, 140 ch)
are recommended to configure security settings before using wireless LAN
(Wi-Fi
®
) at your decision and responsibility.
Notes on packet communication charge
･ The Company assumes no responsibility for leakage of data or information
®
/
that may occur during Bluetooth
®
/wireless LAN (Wi-Fi
®
) communication.
◎ Since a constant Internet connection is possible with this product, packet
･ Since Bluetooth
®
and wireless LAN (Wi-Fi
®
) functions use the same frequency
communication may be performed automatically by some apps, resulting in
band, using the both functions at the same may cause radio wave
high packet communication charges. Therefore, subscription to a packet
interference resulting in decreased communication speed or disconnection
communication charge discount service or flat late plan is recommended.
K
L
● Do not forcibly remove or insert the au Nano IC Card (LTE). Be careful not
to exert excessive force when inserting the card into your au cell phone.
● You are responsible for any damage caused by inserting your au Nano IC
Card (LTE) into some other IC card reader/writer, etc.
● Keep the IC (metal) part of your au Nano IC Card (LTE) clean. Clean the
product with a soft dry cloth (such as the type used for eyeglasses).
● Do not put stickers, etc. on the au Nano IC Card (LTE).
● Do not insert a card other than au Nano IC Card (LTE) into the product. You
cannot use the product with a card other than au Nano IC Card (LTE).
■ Camera
● When using the camera, follow common rules of etiquette regarding camera use.
● Image data might be altered or lost due to malfunction, repair or
mishandling of the product. The Company takes no responsibility for
recovery of altered or lost data, damages resulting from altered or lost data,
and lost profits.
● When photographing important occasions (such as a wedding), take a trial
shot and check the shot image to make sure it is correctly shot and the
audible sound is recorded.
● Do not use the camera for recording commercially available books or
information of which photographing is not allowed.
● Do not leave the camera lens exposed to direct sunlight. Imaging elements
might be discolored or burnt.
■ Music, videos, TV and Radio
● Do not listen to music or watch videos,TV, etc. while driving a car or
motorbike, or riding a bicycle. Use of cell phones while driving a car or
motorbike is prohibited by law. (Use of cell phones while riding a bicycle
may also be punishable by law.) In addition, stay alert to the traffic around
you even when walking. Surrounding sounds may not be heard clearly, and
gazing at the screen might distract your attention causing a traffic
accident. Be especially careful at railroad crossings, station platform and
pedestrian crossings.
y
In the kitchen: You can use the product in the kitchen and other places where
water is used.
･ Do not splash the product with or immerse it in soap water, detergent water,
seasonings, juices, etc. other than tap water.
･ Do not immerse the product in or splash it with boiling water. The product is
not resistant to high temperatures.
･ Do not place the product where it gets extremely hot or cold such as near a
stove or in a refrigerator.
On the poolside
･ Do not immerse the product in or splash it with pool water.
･ Do not use the product underwater. Doing so may cause a fault.
･ When the product gets pool water, wash the product under a mild flow (less
than 6 liters per minute) of tap water at room temperature (5℃ to 35 ℃ ).
･ When washing the product, make sure to hold the microUSB connection
terminal cover, microSD memory card/au Nano IC Card (LTE) slot cover so
that they do not open. Wash the product with your hands. Do not use a brush
or sponge.
■ Common precautions
･ microUSB connection terminal covers, microSD memory card/au Nano
IC Card (LTE) slot cover
Make sure that the microUSB connection terminal cover, microSD memory
card/au Nano IC Card (LTE) slot cover are firmly closed. Just a small particle
(a hair, etc.) on the seals can cause water leak or dust penetration.
Do not open/close the microUSB connection terminal cover, microSD memory
card/au Nano IC Card (LTE) slot cover with gloved hands. Just a small particle
(a hair, etc.) on the seals can cause water leak or dust penetration. Wipe off
any minuscule droplets of water or dirt with a clean dry cloth before closing
the covers.
If the microUSB connection terminal cover, microSD memory card/au Nano IC
Card (LTE) slot cover is deteriorated or damaged, the waterproof/dustproof
property becomes ineffective. In such case, contact an au shop near you.
･ If any liquid other than plain water gets on the product
If any liquid other than plain water (e.g. seawater, detergent, alcohol, juices)
gets on the product, immediately rinse it with plain water. You can wash the
product under a mild flow (less than 6 liters per minute) of tap water at room
temperature (5 ℃ to 35 ℃ ) at a distance of about 10 cm from the faucet or
showerhead. If the product gets dirty, wash it with your hands holding the
F
®
and
◎ To browse homepages, download apps, communicate using apps, send/
®
) functions.
receive e-mails and configure various settings, connection to the Internet is
®
) functions of this product use frequencies
required, to which packet communication charge applies.
* Packet communication charge does not apply to wireless LAN (Wi-Fi
Notes on applications
function: 2.4FH4/XX8
◎ Be sure to check the security of the app, then install it at your own risk. Some
apps might cause virus infection, damage various data, and send out your
location information, usage history or personal information stored in your cell
phone via the Internet.
®
) function: 2.4DS/OF4
◎ The Company assumes no responsibility for any failures that might be
caused by apps you have installed. Repair costs in this case may be
charged even during the warranty period.
◎ The Company assumes no responsibility for any disadvantage brought to
you or any third party by the apps you have installed.
◎ Insertion of a microSD memory card is necessary to use some apps.
◎ Some apps prohibit the product from entering sleep mode while they are
active, or rapidly drain the battery while running in the background.
◎ Operational procedures and screen appearances of the apps preinstalled in
this product and those installed by you are subject to change without notice
as a result of version upgrade. In addition, operating procedures described
®
) function of this product uses 5 GHz band. Using the 5.2
in "Instruction Manual" may differ from the actual procedures.
Specific Absorption Rate (SAR) of cell phones
This model SOL26 mobile phone complies with Japanese technical regulations and
international guidelines regarding exposure to radio waves.
This mobile phone has been designed in observance of the Japanese technical
regulations regarding exposure to radio waves* and limits to exposure to radio
waves recommended by equivalent international guidelines. These international
guidelines were set out by the International Commission on Non-Ionizing Radiation
Protection (ICNIRP), which is in collaboration with the World Health Organization
(WHO), and the permissible limits include a substantial safety margin designed to
assure the safety of all persons, regardless of age and health condition.
The Japanese technical regulations and international guidelines define the limits
using a unit of measurement known as the Specific Absorption Rate (SAR), which
M
● Take care not to listen at ear-splitting volume for a long time, as it might
affect hearing.
● Be careful of sound leakage from earphones in trains or other places with
many people around you.
■ Copyrights and rights of portrait
● You are not allowed to copy, distribute, publish, modify or edit the data you
shot, recorded or downloaded using this product without consent of the
copyright holder, except for personal use, under the copyright law. In
addition, do not use or modify portraits or names of other individuals
without the consent, as it might infringe on rights of portrait. Note that
shooting and recording may be restricted at some live performances,
shows and exhibitions even for personal use.
● Be careful about the copyright and portrait right when posting photos you
shot, etc. on Internet homepages.
● This product is licensed based on MPEG-4 and AVC patent portfolio
license with MPEG LA. LLC. The use is allowed for personal and nonprofit
use only in the cases below.
・Recording videos that conform to MPEG-4 and AVC Visual Standard
(hereinafter referred to as MPEG-4 and AVC Video)
・Playing MPEG-4 and AVC Videos recorded personally by consumers not
engaged in profit activities
・Playing MPEG-4 and AVC Video supplied from the provider licensed from
MPEG-LA, LLC. For further utilizing, please contact MPEG LA, LLC in
U.S.
http://www.mpegla.com
■ Backup content on the product
● Please back up important content recorded or downloaded for the product
to an outside source. Content recorded to memory on the product
sometimes disappears or is altered by unexpected factors, such as static
electricity or a fault, repair, mishandling, etc.
* How to make backups: Store important data such as contacts data,
music, shot photos and videos on microSD memory cards. You can also
send files as mail attachment or transfer to your PC. Note, however, that
there are some data that cannot be copied by using these means.
z
A
microUSB connection terminal cover, microSD memory card/au Nano IC Card
(LTE) slot cover so that they do not open. Do not use a brush or sponge.
･ After the product gets wet
After the product gets wet, drain water, and wipe the main unit with a clean
dry cloth. In cold climates, water on the main unit may turn to frost. Using the
product with frost may cause a fault. Do not leave the product without wiping
off the water (No special measures against condensation have been
implemented in this product).
Do not leave the product without wiping off water. Water may get in the
headset connection terminal, power key, volume key or camera key parts. If
that happens, remove the water by shaking the product (Check your
surroundings and be careful not to drop the product). Wipe off the remaining
water quickly with a clean dry cloth. Note that your clothes or bag may get
wet by water that is not removed or collects in the groove.
Also, do not leave water droplets in earpiece/speaker, microphone/speaker,
second microphone or headset connection terminal. That may interfere with
talking.
･ Rubber seals
The rubber seals on the inner edges of the microUSB connection terminal
cover, microSD memory card/au Nano IC Card (LTE) slot cover are important
to maintain waterproof/dustproof property. Do not damage or remove the
rubber seals.
When closing the microUSB connection terminal cover, microSD memory
card/au Nano IC Card (LTE) slot cover, take care not to get the rubber seals
caught. Forcibly closing the cover with the rubber seals caught may damage
them resulting in loss of waterproof/dustproof property. Just a small particle
(a hair, etc.) on the seals can cause water leak or dust penetration.
If any liquid other than plain water (e.g. alcohol) gets on the rubber seals, it
may cause deterioration in durability.
Do not insert sharp objects into grooves around the microUSB connection
terminal cover, microSD memory card/au Nano IC Card (LTE) slot cover.
Doing so might damage or deform the product or damage the rubber seals,
causing water leak or dust penetration.
It is recommended to replace the parts for maintaining waterproof/dustproof
property once every two years regardless of whether any abnormality is
present. For information on part replacement, contact an au shop near you.
G
H
represents the average amount of radio frequency energy absorbed by the
human. The SAR limit for mobile phones is 2.0 W/kg. The highest SAR value for this
mobile phone when tested for use at the ear is 0.365 W/kg and when tested for use
®
).
at attaching to the body is 0.512 W/kg. There may be slight differences in SAR
levels among individual products, but they all satisfy the limit.
The actual SAR of this mobile phone while talking on the phone, etc. can be well
below that indicated above. This is due to automatic changes in the power level of
the mobile phone to ensure it only outputs the minimum power required to
communicate with a base station. Therefore in general, the closer you are to a
base station, the lower the power output of the mobile phone.
This mobile phone can be used in positions other than against your ear. Use an
accessory such as a carrying case, etc. so that you can hold the product at least
1.5 cm away from your body and also do not contain metal parts between the
product and your body. By doing this, this mobile phone complies with Japanese
technical regulations and international guidelines regarding exposure to radio
waves.
The World Health Organization has stated that present scientific information does
not indicate that use of mobile devices has any harmful effects on the human body.
They recommend that if you are still worried about your exposure then you can limit
your talk time or use a handsfree kit to keep the mobile phone away from your
head and body. If you would like to know more detailed information, please refer to
the WHO website.
(http://www.who.int/docstore/peh-emf/publications/facts_press/fact_english.htm)
Please refer to the websites listed below if you would like to know more detailed
information regarding SAR.
○ Ministry of Internal Affairs and Communications website:
http://www.tele.soumu.go.jp/e/ele/index.htm
○ Association of Radio Industries and Businesses website:
http://www.arib-emf.org/index02.html (in Japanese only)
○ au homepage:
http://www.au.kddi.com/
○ Sony Mobile Communications Inc. website:
http://www.sonymobile.co.jp/support/ (in Japanese only)
* Technical regulations are defined by the Ministerial Ordinance Related to
Radio Law (Article 14-2 of Radio Equipment Regulations).
N
O