Modify the Schedule
Notes:
You can program up to 4 different programs per day.
Each day can have different programs.
It is sometimes faster to program the same schedule
for the entire week and then to modify the exception
days.
To modify:
Press PGM to access the programming mode
Press DAY to select the day to be programmed (hold
for 3 seconds to select all days of the week).
Press PGM to select the program number.
Press HOUR and MIN to set the time
CLEAR to clear the time (--:-- is disregarded).
Repeat steps 2 to 4 for remaining programs.
When completed, press RET to exit mode.
NOTE:
After 60 seconds of inactivity, the thermostat will
automatically exit programming mode.
Custom Grid
Use this blank grid to record your new schedule.
Prog
Setpoint
MO
Model:
A
F
Temperature display:
Time display:
12hrs
Temperature Control
The TH115 thermostat works differently than conventional
electromechanical thermostats.
It is equipped with a proportional integral adaptive (P.I.A.)
controller which determines heating cycles by analyzing
the temperature behavior history within the room.
The P.I.A. controller reduces temperature variations
providing
an
accurate
increasing user comfort.
The controller determines the amount of power required
by the heating system to maintain the setpoint
temperature.
or
press
TU
WE
TH
FR
AF
°F
°C
24hrs
temperature
control
1 to 20%
Technical Support
Model: TH115 A / AF / F
Display
range: 32°F to 140°F (0°C to 60°C)
Setting range
(AF only)
Setting range (floor
Pre-programmed temperature
Comfort: A/AF: 70°F (21°C) and F: 82°F (28°C)
Economy: A/AF: 64°F (18°C) and F: 68°F (20°C)
Vacation: A/F/AF: 50°F (10°C)
Floor
Accuracy:± 0.9°F (0.5°C)
Storage:-4°F to 120°F (-20°C to 50°C)
Temperature
15-minute or 15-second heating cycles according to the
application and power base.
Memory
SA
SU
internal circuit will maintain the programming. Only the
time will have to be set if the power failure is more than
two (2) hours. The thermostat will return to the same
operating mode as set before the power failure.
Warranty
AUBE TECHNOLOGIES INC. ONE (1) YEAR LIMITED WARRANTY
This product is guaranteed against workmanship defects for a
one year period following the initial date of purchase. During this
period, AUBE Technologies Inc. will repair or replace, at our
option and without charge, any defective product which has been
used under normal conditions.
The warranty does not cover delivery costs and does not apply to
products poorly installed or randomly damaged following
installation.
This warranty cancels and replaces any other manufacturer's
express or implied warranty as well as any other company
commitment. AUBE Technologies Inc. cannot be held liable for
related or random damages following the installation of this
product.
The defective product as well as the purchase invoice must be
returned to the place of purchase or mailed, prepaid and insured,
while
to the following address:
Aube Technologies Inc.
705 Montrichard
Saint-Jean-sur-Richelieu, Quebec, Canada J2X 5K8
21 to 40%
41 to 60%
(ambient): 40°F to 86°F (5°C to 30°C)
limit): 40°F to 104°F (5°C to 40°C)
setpoints:
limit:AF: 82°F (28°C)
control: Proportional integral adaptive,
backup: In the event of a power failure, an
61 to 80% 81 to 100%
Imprimer la page