Aube Technologies TI035 Manuel d'installation et d'utilisation - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Aube Technologies TI035. Aube Technologies TI035 13 pages. Programmable wall switch
Également pour Aube Technologies TI035 : Manuel d'installation et d'utilisation (4 pages)
Imprimer la page
Sunset/Sunrise Program
NOTE: By default, once you have programmed the sunset/sunrise parameters, the timer will
follow the sunrise/sunset program when placed in Automatic mode. To set your own
schedule, see section 8.
Defining the sunset/sunrise parameters
Fill out the following table:
Latitude
LATITUDE & LONGITUDE: Enter the coordinates of your city or the nearest city (see
1)
last page). If none of the cities in the table is applicable, this information is usually
available on the internet.
NOTE: Add a minus sign when entering a south latitude coordinate or a west longitude
coordinate.
DAY #: Enter the day #. (Add the code of the current month to the current date.) For
2)
example: For June 24th, the day # = 151 + 24 = 175
January: 0
February: 31
3)
nor/Ad: If your country has daylight savings time, select the appropriate period.
nor
Standard time / Normal time / Winter time
Ad
Daylight savings time / Advanced time / Summer time
Lc: If your city's time zone is based on political or economic boundaries instead of its
4)
coordinates, your lights might switch On/Off too early or too late with respect to sunrise
and sunset. Therefore, apply a correction factor (+1 or -1). Otherwise, leave it at 0.
Programming the sunset/sunrise parameters
Once you have defined the sunset/sunrise parameters, proceed as follows:
Press the CODE button until the desired parameter appears. The parameters appear in
1)
the following order.
Parameter
Latitude (LAT)
Longitude (LONG)
Day number (DAY #)
Daylight savings time
Local correction factor (Lc)
Press the HOUR or MIN button to modify the value (see table above for the buttons to
2)
use).
3)
Press one of the control buttons or close the switch door to return to normal operation.
Longitude
March: 59
May: 120
April: 90
June: 151
Defaulf setting Possible settings
Day #
July: 181
September: 243
August: 212
October: 273
00
-65 to 65
000
-180 to 180
000
1 to 365
nor
nor / Ad
0
-1, 0, 1
3/6
nor/Ad
November: 304
December: 334
Buttons used
HOUR & MIN
HOUR & MIN
HOUR & MIN
Lc
MIN
MIN