2B Warm PN2000G Manuel d'instruction - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} 2B Warm PN2000G. 2B Warm PN2000G 8 pages. Panel glass convection heater

Imprimer la page

3. Touch screen control and remote control.

4. Timer from 1 to 24 hours to turn the convector heater on or off at the desired time.

5. Digital display with automatic room temperature display.

6. For wall mounting or free standing with tripod.

Installation (While use on the floor as portable appliance)

Please attach the feet on the heater's housing, and fixing them with supplied

ST4x12mm(8pcs) screws.

Wall mounting (While use the heater as fixed appliance)

Please note that the product must be installed at least 15 cm from the floor and 50

cm from the ceiling.

-For wall mounting study scheme

1.Install the bracket with screws firstly,see the image1

2.Drill the holes at each sides on the wall,then insert the plastic expanded plugs within,

Fix the bracket in the wall with screw,see the image2

3.Fit the heater into suitable position ensuing that the holes align with bracket.see image3

4.Tight the screw on the top of bracket to catch steady

Operation

Insert the plug into a suitable socket outlet on an A.C. power supply having the same

voltage as that shown on its rating label.

The touch screen buttons located on the product correspond to the remote control

functions: