Con-Treat Grinder Dolly Manuel de sécurité, d'utilisation et de pièces - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel de sécurité, d'utilisation et de pièces pour {nom_de_la_catégorie} Con-Treat Grinder Dolly. Con-Treat Grinder Dolly 15 pages. For 9" hand grinders
Imprimer la page59. All electrical maintenance and repairs are to be carried out by qualified persons only.
60. CAUTION - Line terminals may be alive when main switch is in the off position. Disconnect the machine
completely before performing any maintenance or repairs.
61. WARNING - DO NOT operate the machine with any electrical panels open.
62. Never operate machine in the rain or if heavy moisture is present.
63. Never bypass over current devices in this machine.
64. Never connect or disconnect power cables with voltage present or while under load.
65. Disconnect all power connections and observe lock out / tag out procedures before attempting to carry out
any maintenance or repair on any equipment.
66. Avoid any contact with any rotating parts or driven parts.
67. Never use equipment that has not been tested and tagged (including cords).
68. Before connecting the machine to power, check the condition of all power leads and cables on, or used in
conjunction with the machine. DO NOT USE it if any faults, cuts, wear marks, etc... Get qualified persons to
repair and re-tag it as required by regulations in your country.
69. Connect machine to suitable power outlet. Only use heavy duty power lead suitable for high current use
(preferably 2.5 mm2 cable), no longer than 20 meters.
70. If no power is available within the specified distance have a qualified person install a suitable power outlet
closer to your work. Alternatively use 4 mm² cable for up to 50 meters.
71. Do not operate Dolly with any covers or doors removed or open.
Electrical safety
Page 9