Con-Treat Grinder Dolly Manuel de sécurité, d'utilisation et de pièces - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de sécurité, d'utilisation et de pièces pour {nom_de_la_catégorie} Con-Treat Grinder Dolly. Con-Treat Grinder Dolly 15 pages. For 9" hand grinders

Imprimer la page

29. The First Step is to place the hand grinder over the dolly and loosely install the 3 Bolts in the positions shown

below.

M14 X 30 with

spring washer and

flat washer

30.

31. Next Pull the body of the grinder up to the chassis until the grinder body is aligned with the chassis and then

tighten the top Bolt.

Tighten

32.

33. Now tighten the two side bolts until firm but not tight. These never need to be totally tightened.

Assembly instructions

M14 X 25 with

spring washer only

(both Sides)

Page 5

Parallel