AuCom EMX4 Instructions - Page 3
Parcourez en ligne ou téléchargez le pdf Instructions pour {nom_de_la_catégorie} AuCom EMX4. AuCom EMX4 4 pages.
Imprimer la page
6 Using the Remote Keypad to Control
the Starter
The soft starter will only accept start and reset commands from the remote keypad
Command Source
if parameter 1A
1
2
Start
Stop
3
Exit
Logs
NOTE
If the Commissioning Menu is open on the built-in keypad, the soft
starter will ignore all commands from the external keypad except
Stop.
NOTE
The remote keypad can be safely connected or removed while the
starter is running. It is not necessary to remove mains or control
voltage.
NOTE
If parameter 1A
the remote keypad will cause a trip.
EMX4 Remote Keypad (710-16798-00A)
is set to Remote Keypad.
1
2
3
4
LCL
Reset
RMT
5
Menu
Store
6
Alt
Tools
4
5
6
Command Source
Four-line display for status and
programming details.
Status LEDs.
Menu navigation buttons:
: Exit the menu or parameter, or cancel a
parameter change.
: Enter a menu or parameter, or save a
parameter change.
: Scroll to the next or previous menu
or parameter, change the setting of the
current parameter or scroll through the
status screens.
LCL/RMT: Shortcut to the command
source menu in Setup Tools.
Soft starter local control buttons
Shortcut buttons for quick access to
common tasks.
LOGS: Open the Logs Menu.
ALT: Select which graph to view, or
pause/restart the graph (hold longer than
0.5 seconds).
TOOLS: Open the Setup Tools.
is set to Remote Keypad, removing
INSTRUCTIONS
3